Specifications

10
MyBacharach.com • Fyrite
®
InSIght • Instruction 24-9460
Setting Up the Analyzer
Setup
1. The analyzer is preset at the factory for the parameters shown below, but can be changed as
described in their associated sections. The functions include:
Fuel (8 options)
Temperature Unit (Fahrenheit/Celsius)
Pressure Units (Inches of water column, Pascals, etc.)
Clock
O
2
REFERENCE (calculates the CO reference to O
2
reading)
Print Pressure (measurement on combustion printout)
Zoom (2-4 lines of text in the screen)
Username (company name, address, phone #)
Run/Hold Format*
Language Selection (English, French, Spanish)
Button Sound
Calibration Reminder Period (6, 8, 10, 12 or 15 month reminders)
Inactivity Timeout (30 or 60 minutes – set to None)
Post-Purge Period (5 seconds, 1,5 or 10 minutes)
Date Format
2. To enter Setup; in the MAIN MENU screen, highlight SETUP and press ENTER.
3. Highlight the function you want to change by scrolling up and down. Make selections by
hitting the ENTER button. From there, additional scrolling either up and down or side to side
is required.
4. *RUN/HOLD FORMAT determines what order the combustion readings are displayed. Press
the ENTER button and select EDIT FORMAT. To change the order in which the data is displayed,
scroll up or down to select the position you want to change and press the ENTER button.
The cursor should start flashing. Press the up or down keys to scroll through and select the
desired data to appear in that location and press ENTER. Change the data at other locations
by scrolling up or down and repeating the procedure. To go back to the default setting, select
RESET FORMAT.