Overview of Primary Product

Distributed By:
Fyrite
®
Tech Specifications
Fyrite
®
Tech
Features & Benets:
• Quick payback
The Fyrite
®
Tech reduces service call
time by providing accurate, electronic
test results instantly
• Accurate operation
Tactile feedback from the instrument’s
keypad assures that the appropriate
key has been pressed
• Ergonomically designed
The instrument is lightweight and ts
in the palm of your hand, making it
easy to handle
• Long battery life
Four alkaline batteries typically offer
up to 18 hours of continuous operation
with an automatic “power off” feature
that saves energy
Fyrite
®
Tech Ordering Information
0024-8217 Fyrite
®
Tech 60 (Includes probe, 4 AA Batteries, soft carrying case
and instruction manual)
0024-8266 Fyrite
®
Tech 60 European Model*
0024-8226 Fyrite
®
Tech 60 Kit - without printer (Includes rubber boot, probe,
4 AA Batteries, hard carrying case and instruction manual)
0024-8326 Fyrite
®
Tech 60 Kit - with printer
0024-8227 Fyrite
®
Tech 60 Starter Kit (Includes rubber boot, instruction
manual, Draftrite
®
pocket gauge, True Spot
®
test kit and hard
carrying case)
*European based Calculations
Measurement Ranges:
Ambient Temperature 32 to 212° F (0 to 100° C)
Flue Gas Temperature 0 to 999° F (-18 to 537° C)
Oxygen (O
2
) 0.0 to 20.9%
Carbon Monoxide (CO) 0 to 2,000 ppm
Calculated Ranges:
Combustion Efciency 0.1 to 99.9%
Carbon Dioxide (CO
2
) 0.1 to a fuel dependent maximum (in %)
Carbon Monoxide (Air Free) 0 to 9,999 ppm
Excess Air 0 to 400%
Selectable Fuels: Natural Gas (F1), Oil #2 (F2), Propane (F3),
Kerosene (F4)
Dimensions: 7.5” H x 3.1” W x 2.1” D
(48.39 cm x 20 cm x 13.55 cm)
Weight: 16 oz (0.45 kg) with Batteries
Power: 4 AA Alkaline Batteries (Included), Up to 18
Hours of Continuous Runtime, Typical
Warranty: Instrument and Sensors - 2 Years
Fyrite
®
and Bacharach
®
are registered trademarks of Bacharach, Inc.
©Product Bulletin 8001 2011, Bacharach, Inc., all rights reserved. All information is subject to verification.
March 2011 - REV. 2 Printed in U.S.A.
Made in the USa
Fyrite
®
Tech Replacement Parts & Accessories
0024-1400 IrDA Printer w/ Disposable Batteries
0024-1310 Printer Paper (5 rolls)
0024-1127 Protective Boot with Magnet
0024-0865 Hard Carrying Case
0019-7111 Angled Probe & Hose Assembly w/ Sample & Thermocouple Lines
0019-3265 Replacement Water Trap/ Filter Assembly (for Probe Assembly)
0007-1644 Replacement Filters for Water Trap (package of 3)
0024-7059 Calibration Kit (Regulator and Tubing Only)
0051-1994 Calibration Gas (100 ppm CO)