Instruction Manual

2 - SETTING UP THE FOLDING COT
Unzip and remove the carry bag Fig 1, and
then remove the mattress base by
unfastening the three loop/hook fastenings
straps Fig 2, and take out the folding cot.
Pull apart the tops of the 4 legs as shown in
Fig 3.
Starting with the shorter sides, pull up the Side
Rails with both hands quickly to lock them in
place. (Note that these rails are covered by the
fabric of the cot sides.) Fig 4
Repeat with the two longer sides.
CAUTION: TAKE CARE, AS FINGER PINCHING CAN
OCCUR WHEN LOCKING THE RAILS IN PLACE.
The centre of the cot base must be in a raised
position to allow the rails to lock easily.
Check for the secure engagement of all 4 of
the Folding Connectors by pushing down on
them. Ensure all 4 Connectors have clicked
into place and locked properly.