Video Baby Monitor By Second Camera is supplied only with model V35_2US User Manual Wireless Digital Video Baby Monitor Watch, Listen and Talk to Your Baby Model: V35US (Video Baby Monitor with one camera) V35_2US (Video Baby Monitor with two cameras) For any product related question please contact us at service@hisense.co.il or Toll Free Number (833) 568-2229 www.babysensellc.
Table of Contents 1 Warnings and Safety Instruc�ons 1.1 WARNINGS: 1.2 Safety Instruc�ons for AC Power Adapter 1.3 Safety Instruc�ons for Li-ion ba�ery 1.4 Informa�on on disposal of ba�ery and product 3 3 4 5 5 2 Overview 2.1 Pack Contents 2.2 Parent Unit Overview 2.3 Baby Unit Overview 2.4 Icons Overview 6 6 6 7 7 3 Ge�ng Started 3.1 Powering Baby Unit (Camera) 3.2 Powering Parent Unit 3.3 Charging Parent Unit 3.4 Set Up 8 8 8 8 8 4 Opera�ng the Monitor 4.1 Pairing the Baby Unit with Parent Unit 4.
1. Warnings and Safety Instruc�ons Follow these safety precau�ons to prevent fire, injury or damage to the product. Read and keep instruc�ons: It is very important that you read all the safety and opera�ng instruc�ons before the Babysense video monitor is operated. Please retain your purchase receipt as you will need to produce it if warranty service is required. 1.1 WARNINGS: • STRANGULATION HAZARD: Children can become entangled in cords.
• BATTERY: Before you use the product, we recommend you fully charge the ba�ery of the Parent Unit, so that it con�nues to work if you disconnect it from the power supply to carry it to another loca�on. • INSTALLATION LOCATION: The installa�on loca�on plays an important role in ensuring proper opera�on. Therefore, maintain a distance of at least 5 feet from other electronic equipment, such as microwave ovens or Wi−Fi routers, otherwise they could cause interference.
1.3 Safety Instruc�ons for Li-ion ba�ery • Do not a�empt to repair or adjust any of the electrical or mechanical func�ons of the unit. • Do not dismantle, cut, open, crush, bend, puncture, or shred cells or ba�eries. • If a ba�ery leaks, do not let the ba�ery liquid touch skin or eyes. If this happens, immediately flush the affected areas with water, and seek medical assistance.
2 Overview 2.1 Pack Contents • Parent Unit x 1 • Baby Unit x 1 (x 2 in model V35_2US - Monitor with two cameras) • Wide angle lens x 1 (x 2 in model V35_2US - Monitor with two cameras) • AC Power Adapter x 2 (x 3 in model V35_2US - Monitor with two cameras) • Rechargeable Lithium Ion Ba�ery x 1 • Set for wall moun�ng x 1 (x 2 in model V35_2US - Monitor with two cameras) • User Manual x 1 2.2 Parent Unit Overview 1 2 3 4 11 5 15 6 7 8 9 10 12 13 13 14 1. Power ON/OFF / SLEEP Bu�on 2.
2.3 Baby Unit Overview 16 17 18 23 19 20 21 22 24 25 22 16. Infrared LEDs 17. Wide Angle Lens 18. Light sensor (Night Vision) 19. Power LED 20. Night Light 21. Microphone 22. Temperature Sensor 23. Speaker 24. DC Jack 25. PAIR Bu�on 2.
3 Ge�ng Started 3.1 Powering The Baby Unit (Camera) • Connect the Camera Power Adapter to the DC-Jack (24) on the back of the Baby Unit. • Plug the AC power adapter into the wall outlet. • The unit will power on automa�cally and the green power LED (19) will light up. • Unplug the Baby Unit to turn it off. NOTE: Only use the AC power adapter included in this package. 3.2 Powering The Parent Unit Connect the Parent Unit Power Adapter to the DC-jack (13) on the right side of the Parent Unit.
• Never place the Baby Unit inside the crib, bed or playpen. • Make sure the unit, cords and mains adaptor are out of reach of the baby and other young children. • To avoid a strangula�on hazard, the power cords should be secured and never be hung on the crib or near the baby. • Place the baby monitor in a place where the air can circulate freely and avoid blocking the ven�la�on and speaker openings.
4.3 Scan Mode - Automa�c switching between the paired Baby Units (Cameras) You can set the SCAN (loop) mode and each paired Baby Unit will be displayed on the screen for 10 seconds and then the screen will automa�cally change to the next paired Baby Unit. • Press the MENU/OK bu�on (6) on your Parent Unit and the menu screen will pop up. • Press the LEFT bu�on (9) or RIGHT bu�on (7) un�l the CAM icon is highlighted in red.
NOTE: ECO-LOW - Low sensi�vity level - higher sound level is required to reac�vate the transmission ECO-MED - Medium sensi�vity level - medium sound level is required to reac�vate the transmission ECO-HIGH - High sensi�vity level - low sound level is required to reac�vate the transmission X – ECO OFF - Constant transmission – no standby mode. NOTE: To resume the video and audio signal manually on your parent unit when ECO func�on is on, briefly press the POWER bu�on (1). 4.
4.10 Brightness Adjustments • Press the MENU/OK bu�on (6) on your Parent Unit and the menu screen will pop up. • Press the LEFT bu�on (9) or RIGHT bu�on (7) un�l the Brightness icon is highlighted in red. • Then press the MENU/OK bu�on (6) and a secondary menu with brightness level op�ons will pop up. • Press the LEFT bu�on (9) or RIGHT bu�on (7) to select the desired brightness level (5 levels) and press the MENU/OK bu�on (6) to confirm. • Press the EXIT bu�on (8) to exit the menu. 4.
4.13 Warning Alert Se�ng This se�ng controls the volume of an audio “beep” sound aler�ng when the Parent Unit is low on ba�ery or out of range (no connec�on to Baby Unit). You can set a lower volume level during the night and higher level during the day. • Press the MENU/OK bu�on (6) on your Parent Unit and the menu screen will pop up. • Press the LEFT bu�on (9) or RIGHT bu�on (7) un�l the ALERT icon is highlighted in red.
6 Maintenance • All of the following maintenance procedures should only be performed when Baby and Parent Units are unplugged. • Clean the surfaces of the Baby and Parent Units with a so�, fluff-free cloth. • Never use cleaning agents or solvents. • If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care not to allow water into any openings. • Wide Angle Lens cleaning – smudges and dust on the lens can diminish sharpness and reduce video quality.
Background noises Picture is black and white Lines/marks across the screen The rechargeable ba�ery will not charge or no charge light shows • In a quiet environment, surrounding the Parent Unit, decrease the volume on your Parent Unit to level 3 and below. • In a loud environment, surrounding the Parent Unit, increase the volume to the maximum level. • Automa�c Night vision mode may be on. Turn on the room lights to force monitor out of night vision mode. • Lens is dirty.
8 Specifica�ons Product Model V35US Frequency Type of Modulation Data Rate Channel Bandwidth Transmission Range Input Voltage Power Adapter 2.4GHz FHSS GFSK 3 Mbps 3.3758 MHz Up to 960 feet / 300 meters (open space – no obstructions) 5V, 700mA Input: 240-100VAC 60 / 50Hz, 200mA Max; Output: 5V, 700mA; LCD Screen 3.5” TFT LCD Rechargeable battery (built-in in Parent Unit) Model: YS603450 Operating time with battery fully charged (Parent Unit) * It takes about 8 hours to fully charge the battery.
10 IC Statements This device complies with Industry Canada license-exempt RSS standard(s): Opera�on is subject to the following Two condi�ons: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired opera�on of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Video Baby Monitor By
