Manual

- 10 -
Guest mode:
• Place the scale on a hard, level and at surface
• Quickly and rmly tap center of scale platform with
foot to activate digital display.
• Wait until the screen displays “00.0KG”
• The scale is ready to be used
• Step onto the scale
• “000” will ash
• Your weight will be displayed on the screen and will
remain displayed for a few seconds
• The scale will go out automatically after a few seconds.
User mode:
• Before the rst use, the scale should be programmed
by the user (cf. PROGRAMMING section).
• Place the scale on a hard, level and at surface.
• Using your foot, press the button corresponding to
your user number.
• The screen will display your user number and
“00.0KG”.
• The scale is ready to be used.
• Step onto the scale.
• “000” will ash on the screen.
• Your weight, your BMI, the dierence in weight com
-
pared to the previous weighing (indicated by “∆ Kg”)
and the coloured indicator related to this dierence
are instantly displayed for a few seconds.
Note: When using the scale for the rst time, change in
weight ( ΔKG) will show «0.0».
• Your weight is automatically saved in the memory of
the scale. The scale will beep to conrm the informa-
tion has been saved.
• The scale will go out automatically after a few seconds.
INTERPRETING THE DATA:
a. Change in weight (∆ Kg)
The scale records your weight after each use. It auto-
matically recalls this information to calculate the
change in weight between the current and the
previous weighings. This dierence is then instantly
transcribed into kilograms on the screen and the
extent of this change appears in the form of a coloured
indicator according to the table below.