MULTI STYLE 2800DU SAFETY CAUTIONS • This appliance should only be used as described within this instruction booklet. Please retain for reference. IMPORTANT CHILD SAFETY WARNING! Polythene bags over a product or package may be dangerous. To avoid danger of suffocation, keep this wrapper away from babies and children. This bag is not a toy. WARNING! THIS APPLIANCE GETS HOT! • ALWAYS keep out of reach of children (during and after use and whilst cooling).
IMPORTANT SAFETY • Do not use the appliance in the bathroom. • WARNING! Do not use this appliance near water contained in basins, bathtubs or other vessels. • Do not immerse the appliance in water or other liquids. • Always inspect the appliance before use for noticeable signs of damage. Do not use if damaged, or if the appliance has been dropped. In the event of damage, discontinue use immediately. Contact the Conair Customer Care Line (refer to ‘UK After Sales Service’ section for further information).
understand the safe use and hazards involved and are adequately supervised. • Allow appliance to cool before storing away. • After use, do not coil the lead around the appliance as this may cause damage. Instead, coil loosely by the side of the appliance. • This product complies fully with all appropriate EU and UK Legislation and the Standards relevant to this type and class of appliance. We are an ISO9001:2015 certified company that continually evaluates our Quality Management System performance.
INSTRUCTIONS FOR USE • Ensure the hair is dry and combed through to remove any tangles. Divide the hair into sections ready for styling. • Fit the required attachment as described below, ensuring that the attachment is locked into position. • To remove the attachments ensure the appliance is cool and unplugged. On the power handle there are two slide switches on the top and lower housing. Slide back the switches individually and pull to release the separate attachments.
there is a small ridge, ensure this is facing upwards and then begin to push the attachment into the handle, whilst still holding the handle in the closed position you will need to line up the grooves on the attachment so that they connect with the tong attachment and it clicks into place. NOTE: When using the 19mm tong only insert it as one attachment, as the spring lever is already attached to the tong.
DUAL BARREL TONG ATTACHMENT To create waves and styles with movement: - Use both the 13mm and 16mm tongs Fitting The Dual Barrel Tong Attachment • Insert the 13mm size tong in the bottom slot of the appliance. On the bottom of the attachment there is a small ridge, ensure this is facing downwards and then push the attachment into the handle until it clicks into place. • Hold the handle in the closed position and insert the 16mm size tong in the top slot of the appliance.
SPIRAL SLEEVE ATTACHMENT To create ringlets and tousled curls: - Use the 19mm tong with the spiral sleeve NOTE: The spiral sleeve can only be used with the 19mm tong attachment. Fitting The Spiral Sleeve Attachment • Ensure the 19mm tong is inserted into the appliance (Please see the ‘Fitting The Tong Attachments’ section for direction) and is completely cool. Push the spiral sleeve over the tong and the long lever.
BRUSH SLEEVE ATTACHMENT To create shape, texture and volume: - Use the 19mm tong with brush sleeve. NOTE: The brush sleeve can only be used with the 19mm tong attachment. Fitting The Brush Sleeve Attachment • Ensure the 19mm tong is inserted into the appliance (Please see the ‘Fitting The Tong Attachments’ section for direction) and is completely cool. Push the brush sleeve over the tong and the long lever until it reaches the end of the barrel to attach.
Fitting The Straightener/Crimper Attachment Insert both styling plate attachments into the two slots in the power handle, to do this make sure the ridge is lined up so the attachments can be clicked into place. Changing The Plates To change between the plates, close the power handle together and simply push down the convertible button that is on the side of the styling plate attachment. Instruction For Use - Straightener Plates • Ensure the hair is dry and combed through to remove any tangles.
CARE & MAINTENANCE To help keep your appliance in the best possible condition follow the steps below: • Do not wrap the lead around the appliance, instead coil the lead loosely by the side of the appliance. • Do not use the appliance at a stretch from the power point. • Always unplug after use. For more information on this appliance visit www.babyliss.co.
Exclusions This guarantee will no longer be valid meaning that The Conair Group Ltd will not be liable to repair or replace your product where: 1.) The appliance has been used on a voltage supply other than that which is marked on the product, or advised within this instruction booklet 2.) The appliance has been purchased from an unauthorised stockist* 3.) The appliance is used for professional / non domestic usage 4.) Repairs or alterations have been attempted by unauthorised persons 5.
Guarantees on replacement products run from the original purchase date or date of delivery, whichever is later, and not from the date of replacement. This guarantee is an additional benefit and does not affect your statutory rights as a consumer. If you have any queries regarding this guarantee please contact the Conair Customer Care Line on 03705 133 191 (09:00 to 17:00 Monday to Friday) or e-mail ukinfo@conair.
SAFE DISPOSAL The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be handed to an appropriate collection point for the recycling of Electrical and Electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
