Item# 4260 Hudson Nightstand with USB Port Table de nuit avec port USB Hudson revised 24SEP2021 Assembly Instructions Manuel d’assemblage 1
Thank you for purchasing a Babyletto nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.babyletto.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly. Please do not substitute parts or use power screwdrivers.
PARTS • PIÈCES Not to Scale/Pas à l'échelle A. Left Side Panel A. Panneau latéral gauche B. Right Side Panel B. Panneau latéral droit C. Center Panel C. Panneau central F. Foot (2) F. Pied (2) D. Top Panel D. Dessus E. Bottom Panel E. Panneau inférieur G. Base Cross Bar (2) G. Traverse de base (2) H. Back panel H. Panneau arrière I-1. Drawer front I-1. Façade de tiroir J-1. Left drawer side J-1.
K-1. Right drawer side K-1. Côté droit de tiroir L-1. Drawer back L-1. Arrière de tiroir M-1. Drawer bottom M-1. Fond de tiroir N. Finished Drawer Front N.Façade de tiroir de finition O. USB Cable O. Câble USB HARDWARE • ACCESSOIRES DE MONTAGE Bolts in Actual Size/Boulons (taille réelle) H1. 1-1/2” Round Head Bolt (4) H1. Boulons à tête ronde de 3,8 cm (1-1/2 po) (4) H2. 1” Wood Screw (8) H2. Vis à bois de 2,5 cm (1 po) (8) H3. 3/4” Wood Screw (8) H3. Vis à bois de 1,9 cm (3/4 po) (8) H4.
ASSEMBLY INSTRUCTIONS • INSTRUCTIONS D’ASSEMBLAGE 1 F H8 F 2 F G F G H8 H8 5
3 E H7 G H1 F 4 H5 E H7 D 6
5 H6 C H5 H7 A B 6 B H5 H6 C (Facing bottom) (vers la inférieur) H6 A * Rotate H6 clockwise to secure. * Tourner H6 dans le sens horaire pour fixer.
7 H6 H5 C B A H6 * Rotate H6 clockwise to secure. E * Tourner H6 dans le sens horaire pour fixer. 8 D H5 H6 A B * Rotate H6 clockwise to secure. H6 * Tourner H6 dans le sens horaire pour fixer.
D H H4 (Back) (Arrière) 10 A DRAWER ASSEMBLY INSTRUCTIONS INSTRUCTIONS D'ASSEMBLAGE DES TIROIRS 10a 10b H2 I-1 I-1 J-1 M-1 H2 K-1 9
c H2 M-1 L-1 H2 10d H9 N H3 H3 I-1 H9 H3 H3 10e * Make sure that the drawer is placed on the tabs on the glide rails. * S’assurer que le tiroir est bien placé sur les onglets des glissières.
10f * Screw the 7/16” wood screw (H4) in the pre-drilled holes on the drawer side panels. * Visser les vis à bois de 1,1 cm (7/16 po) (H4) dans les avant-trous des côtés du tiroir. H4 H4 Do not overtighten the screws. Ne pas trop serrer les vis.
11 O 12 O H3 O H3 H (Back) (Arrière) H3 O H3 12
Finish Terminé READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT. KEEP THE INSTRUCTIONS FOR FUTURE USE. Recheck all screws and bolts to be sure they are fastened securely. Do not overtighten. KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. GARDER CE MANUEL EN LIEU SÛR POUR UN USAGE ULTÉRIEUR. LISEZ ATTENTIVEMENT TOUTES LES INSTRUCTIONS AVANT D’UTILISER CE PRODUIT. CONSERVER CES INSTRUCTIONS POUR UN USAGE ULTÉRIEUR.
ONE YEAR LIMITED WARRANTY: We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request. This warranty only covers new units with original packaging and ownership, and is not transferable. It does not cover any used, secondhand or demo models.
Registering your product is even easier than before. You can register your product on our website at : www.babyletto.com/registrations IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT: WWW.BABYLETTO.COM/PARTS OR YOU CAN CONTACT US BY MAIL: BABYLETTO 8700 REX RD., PICO RIVERA, CA 90660 TEL: 323-282-5163 L’enregistrement de votre produit est plus facile que jamais. Veuillez l’enregistrer sur notre site Web à : www.babyletto.
