User manual

Pro-Stcher User Manual Installaon | 3.11
6. The black cables aached to the Pro-Stcher carriage
should be routed up between the rear handles and
the quilng machine, toward the right-hand side of
the machine (looking at the machine from the back).
Aach the cable clips (see Parts List, item J) and
route the cable accordingly. Plug the other end of the
power cord into the back of the quilng machine.
7. If you haven’t already done so, the small black cable
with the black 3-connector clip should be routed
underneath the P-Pod and snapped into the quilng
machine’s Y-encoder.
The cables that run from the carriage up to the
computer should be clipped into the cable clip
under the rear handlebar to help prevent these
cables from geng caught on the edges of the
carriage.
Stch-
regulator
cable