Instruction manual

46
Practical Application d
Floral patterns – Creating a floral pattern from a shape –
Creating Various Embroidery Designs
Step 3
Drawing floral pattern (detailed mode)
1 Select the rightmost base circle
pattern created in "Step 1", and then
click [Create Floral Pattern] in the
[Shapes] tab.
2 Click [To detailed mode] in the
lower-left corner of the dialog box to
switch to detailed mode.
3 Drag the sliders to set [Density] to
"10" and [Pattern] to "85", and then
click [OK].
4 Select the base circle pattern, and
then set the [Line sew type] to
[Chain Stitch].
5 Click the [Color] tab, and then click
[Honeysuckle] in the color thread
list.
6 Click the [Sewing Attributes] tab,
and specify the following settings.
Stitch Type
Size 3.5 mm
Time 5 times
Arrange
Start/End Type Feed
7 Select the floral pattern, and then
reduce it so that the floral pattern
fits into the circle outline.
8 After selecting the floral pattern,
specify the line sew type, color and
following sewing settings by
repeating steps 4 through 9 in
"Step 2".
Line sew type Triple Stitch
Color Honeydew
Run pitch 2.0 mm