Installation guide

7
ENGLISH
d
Press the desired color scheme from samples.
* Press to display the new schemes.
a Press to review the previous schemes.
e
Press to select the displayed color
scheme.
* Press to return to the previous screen.
* You can continue selecting color schemes from the
selected page prior to pressing .
* Press or to display the other color schemes.
→ The embroidery edit screen will appear.
Note
• If the following message appears, there are not
enough colors in the custom thread table, to display
the color scheme you have selected to display. In
this case, set more colors in the custom thread
table, or select less colors in the Color Visualizer
function.
• If the following message appears, there are not
enough colors in the thread table, to display the
color scheme effect you have selected. In this case,
either select another effect or the custom thread
table (300 color palette) or less colors in the Color
Visualizer function. If there are not enough number
of colors set in the custom thread table, set more
colors in the table. Refer to “Creating a Custom
Thread Table” in the Instruction and Reference
Guide for the machine, about setting the colors in
the custom thread table.
Memo
• Selection for the desired number of colors must stay
within the range for the number of thread changes
for the pattern you selected.
Note
• Maximum 10 pages of schemes can be reviewed.
After 10 pages of schemes, the oldest page is
deleted every time you press .
a