Installation guide

Other New Features

■ If an area is not selected while using the

built-in camera to align the embroidering

position, scanning will start from the center.

■ The image of the needle position displayed

by the built-in camera can be magnified by

200%.

■ The parameters in the Settings screens can

also be displayed in a language other than

English.

Example: Deutsch (German) screen

■ When combining character patterns, the

stitching connecting patterns (jump stitches)

are no longer displayed in the preview so

that the patterns can be viewed more

clearly.

Note

• Scanning cannot start from the center after an area

has been selected. To scan from the center, press

to close the window, then display the

window again but do not select an area to scan, then

press .

Note

• Jump stitches may be displayed on the character.