Installation guide

11
ENGLISH
■ To save an image of the Settings screen
Press .
→ The image file will be saved to the USB media.
c
Remove the USB media, and then check the
saved image(s) using a computer.
The files for camera images are saved with the
name “C**.BMP”, and the files for Settings
screen images are saved with the name
“S**.BMP”.
• “**” in the names “C**.BMP” and “S**.BMP” will
automatically be replaced with a number between
00 and 99.
Displaying The Grid
A grid can be displayed when the built-in camera is
used to display the needle position in the LCD.
a
Press .
→ The grid appears.
• To turn the grid off, press .
Memo
• For details about displaying the Settings screen,
refer to “Using the Machine Setting Mode Key” in the
machine’s Instruction and Reference Guide.
Note
• If 100 image files have already been saved on the
USB media, the following message appears.
In this case, delete a file from the USB media or use
different USB media.
Memo
• For details on using the built-in camera to display
the needle position, refer to “Checking the Needle
Location in the Screen” in the machine’s Instruction
and Reference Guide.