Specifications

Troubleshooting 185
5
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
You tried a function that cannot be used when the embroidery unit is
attached.
A card that cannot be used with this product has been inserted, and you
tried to select a pattern from the card.
An embroidery pattern incompatible with this machine was selected.
The utility stitch or character stitch key was pressed while the
embroidery unit is attached.
You try to retrieve a pattern downloaded as one for a different machine.
The machine is in embroidery mode and the combined character
pattern is too large for the embroidery frame. You can rotate the pattern
90 degrees and continue combining characters.
Transmitting by USB
The “Start/Stop” button, the embroidery key, or the memory key is
pressed in embroidery mode, but the embroidery unit is not attached.
The bobbin winder is winding the bobbin.
Error Message Probable Cause