Specifications

Embroidering 163
4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
h
Press / (“Start/Stop” button) again.
X The embroidery begins again.
X Stitching stops automatically with
reinforcement after one color has been
completed. When automatic thread cutting
is set, the thread is cut.
i
Set up embroidery thread for the next color,
and repeat steps
a through h.
j
Cut the excess thread.
X When the last color is sewn, “Finished
sewing.” will appear on the display. Press
, and the display will return to the
initial screen.
Memo
z For the automatic cutting setting, refer to
“LCD (liquid crystal display) operation”
(page 154).
Appliquéing
Prepare the base fabric and the appliqué fabric
(appliqué piece). Press / (Settings key), and
set the thread color display to NAME OF COLOR, so
“APPLIQUE MATERIAL”, “APPLIQUE POSITION”
and “APPLIQUE” are displayed on the screen.
a
Select an appliqué pattern.
b
When “APPLIQUE MATERIAL“ is displayed on
the screen, apply iron-on stabilizer to the back
of the appliqué piece fabric, and stretch it on
the embroidery frame.
c
Lower the presser foot lever, and press /
(“Start/Stop” button).
X The cut-out for the appliqué piece is sewn,
and the sewing machine stops.
a Cut-out line
b Appliqué piece fabric
X “APPLIQUE POSITION“ will be displayed
on the screen.
1
2