Performance Double (Assem) 12/16/04 4:08 PM Page 1 Assembly Instructions Performance Double The Ultimate High Performance Double Jogging Stroller Important, Keep for Future Reference
Performance Double (Assem) 12/16/04 4:08 PM Page 2 For the sake of your precious cargo, please read these warnings before using your Baby Jogger. Frame • Important, keep this booklet for future reference. 1 2 • Accessories which are not approved by the manufacturer or distributor should not be used. • WARNING: Prevent serious injury to your child by always using the safety harness. • WARNING: Any load attached to the handle affects the stability of the stroller.
Performance Double (Assem) 12/16/04 4:08 PM Page 2 REMOVE ALL PROTECTIVE CAPS FROM WHEELS AND THE PLASTIC FORKTIP PROTECTOR PRIOR TO ASSEMBLY Forktips Canopy Plastic Protector 1 Thread the center canopy connection through the seat to secure to the frame Frame Jawslide using a phillips head screwdriver, attach canopy to frame on all three connections.
Performance Double (Assem) 12/16/04 4:08 PM Page 4 Front Wheel Rear Wheels 1 To install front wheel, lay stroller back so handle is resting on floor. Open the calipers by flipping the caliper lever toward the rear wheels. • To install, gently slide the wheel’s axle into the hole in the axle end until you hear it click into place. 2 Insert the front wheel into the fork tips by aligning the axle flats with the fork tip flats.
Performance Double (Assem) 12/16/04 4:08 PM Page 6 Safety Harness Adjusting safety harness: • Loosen the shoulder straps from their plastic guides. • Slide the end of each strap through pair of seat loops closest to your child’s shoulder. • Slide the end of the shoulder strap back into plastic guide. Please note: If you feel the straps are too tight, you may adjust their length by sliding the plastic guides toward the top of the seat. • Lock both sides of the strap mechanism into the center buckle.
Performance Double (Assem) 12/16/04 4:08 PM Page 8 JOGGER IS PACKAGED WITH THE HAND BRAKE ASSEMBLY LOOSE. TIGHTENING IS NECESSARY FOR SAFE OPERATION! Brakes Hand Brake with Parking Button NOTE: Some Joggers are shipped with the Canopy, Seat and Basket pre-assembled. Assembly instructions are given if any pre-assemble items are removed for cleaning or replacement. Seat Adjusting the Brake • To use the parking button feature, simply squeeze the brake handle and push the park brake button.
Performance Double (Assem) 12/16/04 4:08 PM Page 10 Reclining Seat Basket 1 Simply adjust seat straps 1 Snap front basket straps to seat’s 2 Snap the rear snap strap around upright. to desired degree of recline. 2 Pull on strap when you 3 Rear flap serves as sun want to return the seat to its upright position. canopy when seat is in reclined position. bottom straps. Note: The rear of basket has the mesh material and the front doesn’t.
Performance Double (Assem) 12/16/04 4:08 PM Page 12 In Motion Steering • Steering your stroller is simple: it’s balanced to turn with just a light touch on the handlebar. For tighter turns, push down on the handlebar and raise the front wheel to steer. Wrist Strap • Make sure wrist strap is around your wrist whenever your baby is in the stroller. The Baby Jogger is lightweight and ready to roll – with or without you – and the wrist strap helps you gain control over your stroller.
Performance Double (Assem) 12/16/04 4:08 PM Page 14 Thank You! We wish you many happy journeys with your new Baby Jogger! Your stroller is a great product, and we are proud to manufacture it. If you have any questions or comments, please give us a call at. 1.800.241.1848 Baby Jogger is a Division of Dynamic Brands 2042 Westmoreland Street • Richmond, VA 23230 T: 800.241.1848 • F: 804.262.6277 www.babyjogger.com BJC P/SD 08.10.
