User Guide

4
5
• To install, gently slide the wheel’s axle into
the hole in the axle end until you hear it
click into place.
• To remove, simply push in the spring lock while
pulling out the wheel.
• Your stroller may have a push tab instead
of the spring lock, the above steps will
also work for strollers with the push tab.
Rear Wheels
Spring
Lock
Spring
Lock
1 Unclip top of shoulder strap
from the seat and re-clip on
the pair of seat loops closest
to child’s shoulder height.
2 To adjust the strap length:
Remove the shoulder pads
and move the plastic guide
up or down to lengthen
or shorten.
3 To unbuckle the harness:
Press one side of the center
button and pull the
corresponding side buckle
away from the center buckle.
Repeat to unbuckle other
side. To buckle: Simply push
side buckle into center buckle
until it locks in place.
4 To adjust side straps:
Press side buckle
latch and slide
strap to lengthen
or shorten.
5 To adjust the center
strap: Move its plastic
guide up or down.
WARNING: Always use the crotch strap in combination with the waist belt.
Safety Harness