Instruction manual

Instruction manual
WA-22h
15
5.6. Discontinuing a measurement
If it is necessary to interrupt a blood pressure measurement for any reason
(e.g. the patient feels unwell), the («O/I+Memory button») can be pressed at any time.
The device then immediately lowers the cu-pressure automatically.
5.7. Memory – displaying the last measurement
The blood-pressure monitor automatically stores the last measurement value.
By pressing the («O/I+Memory button») button for at least 3 seconds,
the last measurement will be displayed. If an irregular heartbeat interval was detected
n any measurements stored in memory, the icon will be displayed.
Further information
Measurements should not occur soon after each other, since otherwise, the results will be
falsied. Wait therefore for at least 1 minute in a relaxed position, sitting or lying, before you
repeat a measurement
6. Error messages/malfunctions
If an error occurs during a measurement, the measurement is discontinued
and a corresponding error code is displayed
(Example: Error No. 1).