Instruction manual

Fig. 1
Rear view of Continental
power supply, showing label
indicating the power supply
voltage. The power supply for
the Standard version is similar
but rotated through 90
degrees.
The regulation of the power supply is such that, normally, no adjust-
ment will be necessary and the unit is set for the country of destination,
e.g. European or America, etc. If, after having made this check on mains
supply, it is necessary to adjust the mains voltage, please refer to the
above diagram and read the instructions regarding the removal of the
power supply from the cabinet.
Adjustment of mains voltage setting.
IT IS IMPORTANT TO DISCONNECT THE MAINS POWER
SUPPLY AND AUDIO FEED FROM AMPLIFIER (IF CON-
NECTED) BEFORE ATTEMPTING TO REMOVE THE POWER
SUPPLY UNIT FROM THE CABINET.
Fig. 2
Shows a 70C power supply
unit removed from the
cabinet.