Installation guide

ManualsBrandsB-Tech ManualsTVs & monitorsBT8427

B-TECH AUDIO VIDEO MOUNTS

www.btechavmounts.com

CONTENTS

INSTALLATION TOOLS REQUIRED

FEATURES

BT8427

TELESCOPIC FLAT SCREEN CEILING MOUNT

INSTALLATION GUIDE & PARTS LIST

This Pack Contains 1 Mount

Drill

Pencil

Stud finder

(optional)

Installation Safety Notes.....................................................................................................................2

Parts List.............................................................................................................................................4

Installation Instructions.......................................................................................................................6

Optional Accessories........................................................................................................................17

Product Dimensions..........................................................................................................................18

B-Tech Contact Details.....................................................................................................................20

PLEASE KEEP THIS FOR FUTURE REFERENCE

13mm (1/2") spanner

or socket

12mm (15/32") masonry bit

or 8mm (5/16") wood bit

REG DESIGN NO:4010380

● Designed for screens up to 65” (165cm) / 70kg (154lbs)

● Universal interface fits screens with VESA and non-VESA

mounting patterns up to 970mm (38.2”) x 500mm (19.7”)

● Ceiling drop: 745mm (29.3”) – 1000mm (39.4”)

● Easy adjustment of tilt +20°

● Pre-assembled for simple 3 step installation

● Integrated cable management

● Mounts screen in landscape or portrait formats

● All mounting hardware and fixings included

Summary of content (20 pages)

PAGE 1
BT8427 TELESCOPIC FLAT SCREEN CEILING MOUNT INSTALLATION GUIDE & PARTS LIST This Pack Contains 1 Mount PLEASE KEEP THIS FOR FUTURE REFERENCE FEATURES ● ● Designed for screens up to 65” (165cm) / 70kg (154lbs) Universal interface fits screens with VESA and non-VESA mounting patterns up to 970mm (38.2”) x 500mm (19.7”) ● Ceiling drop: 745mm (29.3”) – 1000mm (39.
PAGE 2
INSTALLATION SAFETY INSTRUCTIONS CAUTION: This ceiling mount is intended for use only with the maximum weights indicated. Use with flat screens heavier than the maximum indicated may result in instability causing possible injury. Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference.
PAGE 3
CS Společnost B-Tech International Ltd. doporučuje provést instalaci tohoto produktu prostřednictvím odborného instalátora AV či jinak způsobilé osoby. Společnost B-Tech International Ltd, její distributoři a prodejci nenesou odpovědnost za škody nebo zranění způsobená nevhodnou instalací. Tento výrobek je nutno umístit do vhodné konstrukce a používat jen po uvedenou maximální výšku. DE B-Tech International Ltd.
PAGE 4
BT8427 PARTS LIST TUBE & TILT PLATE ASSEMBLY 4 1 5 18 6 2 10 3 21 22 11 16 8 12 24 24 23 13 10 7 9 20 20 19 21 22 Suitable for loads up to 70kg (154lbs) 4 23 15 15 23 14
PAGE 5
FLAT SCREEN INTERFACE KIT (FOR ATTACHING MOUNT TO BACK OF FLAT SCREEN) 25 A B M C D E F N REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 PART NAME OUTER TUBE TAPER TRIM INNER TUBE COVER PLATE HEIGHT ADJUSTMENT PIN M8 x 12mm HEX SCREW COLLAR M8 x 15mm GRUB SCREW M8 x 65mm HEX SCREW COLLAR COVER TILT PLATE HOOK PLATE INTERFACE PLATE CROSS RAIL VERTICAL ARM LONG TILT ARM SHORT TILT ARM M10 x 10mm GRUB SCREW M8 x 12mm FLAT HEX SCREW M8 SPRING WASHER M5 x 15mm HEX SCREW M5 MET
PAGE 6
INSTALLATION INSTRUCTIONS 1 Fix the tube and tilt plate assembly to the ceiling.
PAGE 7
2 Adjust ceiling drop to desired height.
PAGE 8
There are two methods of attaching the mount to the screen, depending on the screen fixing pattern. A) VESA Fixings: 75 x 75mm, 100 x 100mm, 200 x 100mm or 200 x 200mm (page 6) B) VESA Fixings: 300 x 200mm, 400 x 200mm, 300 x 300m, 400 x 300mm, 400 x 400mm, 600 x 400mm or 800 x 400mm and non-VESA up to 970 x 500mm (page 7) 3 Attach the interface to the back of the screen. A) For VESA patterns up to 200 x 200mm, attach interface plate to back of the screen.
PAGE 9
B) For VESA patterns from 300 x 200mm up to 800 x 500mm and non-VESA patterns; i. Attach the cross rails to the interface plate.
PAGE 10
ii. Slide on the interface arms.
PAGE 11
iii. Attach the interface arms to the flat screen. 15 A B C D E 1 F G H I TO P M N O TT BO 15 OM FLAT SCREEN Use spacers on recess in flat screen & for extra space for cables. M N O P Put required screw into the relevant hole / slot. SCREW INTERFACE ARM SPACER WASHER FLAT SCREEN RECESS Please refer to screen manufacturer manual for guidance on screen mounting.
PAGE 12
iv. Fix the cross rails to the interface arms.
PAGE 13
Tilt options: A) For installation with 20° tilt or without tilt follow step A (page 13) B) For installation with 15° short tilt arm follow step B (page 14) 4 Adjust and fix the tilt. A) For 20° tilt: i. Tilt - To fix tilt, push part 12 forward to 20° then tighten part 21. 21 25 21 20° 25 12 ii. Flat - To fix flat, push part 12 flat and insert parts 21 & 22 through the tilt plate into the tilt arm.
PAGE 14
B) For 15° short arm tilt, remove parts 21 & 22 from the long tilt arm, then replace part 16 with part 17, then attach using parts 21 & 22. 16 i. ii. 22 22 25 25 21 21 iii. iv.
PAGE 15
6 Hook the flat screen onto the hook plate then secure using parts 23 & 24. i. WARNING: MAY REQUIRE 2 PEOPLE 13 13 FLAT SCREEN 12 12 25 ii.
PAGE 16
7 Optional - cable management CABLE 16
PAGE 17
OPTIONAL ACCESSORIES This product is compatible with the System 2 range of professional install products from B-Tech Pole Extension Example Install BT8427 AV Component Shelf Example Install BT8427 BT7162 BT7823 BT7151 BT7052 BT7850 Additional System 2 components and accessories are available from B-Tech. Please visit www.btechavmounts.com for more information.
PAGE 18
BT8427 PRODUCT DIMENSIONS MAX MIN 1000mm 39.4" 745mm 29.3" 50mm 2" MIN 600mm 23.6" 25mm 1" 1070mm 42.1" O 60mm 2.4" 20° 15° 50mm 2" MAX O 235mm 9.3" 18 THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
PAGE 19
BT8427 PRODUCT DIMENSIONS INTERFACE PLATE 970mm 38.2" MAX 520mm 20.5" 500mm 19.7" MAX 992mm 39.1" O 150mm 5.9" O 10.5mm 0.4" 280mm 11" 90° 120mm 4.7" 1 0. 0 . 5 4" m m 120mm 4.7" 2 0. 4m 9" m 200mm 7.9" 150mm 5.9" 100mm 3.9" 75mm 3" INTERFACE PLATE 200mm 7.9" 150mm 5.9" 100mm 3.9" 75mm 3" CEILING PLATE 280mm 11" THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
PAGE 20
www.btechavmounts.com B-TECH AUDIO VIDEO MOUNTS HEAD OFFICE Bennett House, Long March, Daventry, Northants NN11 4NR, UK Email: info@btechavmounts.co.uk EUROPE Brixtonlaan 32, Zaventem 1930, Brussels, Belgium Email: info@btechproav.com NORTH AMERICA 203 Eggert Road, Buffalo, NY 14215, USA Email: info@btechavmounts.com SINGAPORE Ruby Industrial Complex, Singapore 347740 Email: info@btechavmounts.com.sg ©2010 Bennett Technologies Limited. All rights reserved.