Installation guide

ManualsBrandsB-Tech ManualsTVs & monitorsBT8223

B-TECH AUDIO VIDEO MOUNTS

www.btechavmounts.com

CONTENTS

INSTALLATION TOOLS REQUIRED

FEATURES

BT8223

DOUBLE ARM FLAT SCREEN MOUNT

FOR EXTRA LARGE SCREENS

INSTALLATION GUIDE & PARTS LIST

This Pack Contains 1 Mount

PLEASE KEEP THIS FOR FUTURE REFERENCE

● Designed for flat screens up to 65” (165cm) / 60kg (132lbs)

● Fits screens with VESA & Non-VESA mounting patterns

up to 790mm (31.1”) x 500mm (20”)

● Easy tilt adjustment +15°

● Features three swivel points:

180° at wall, 360° at central pivot and 180° at interface

● Suitable for concrete / brick or stud walls up to 16”

● Simple ‘hook-on’ installation with all

mounting hardware included

Installation Safety Notes.....................................................................................................................2

Parts List.............................................................................................................................................4

Installation Instructions.......................................................................................................................6

Product Dimensions..........................................................................................................................18

B-Tech Contact Details.....................................................................................................................20

12mm (15/32") masonry bit

or 8mm (5/16") wood bit

Crosshead

screwdriver

Drill

Pencil

Stud finder

(optional)

17mm (17/26")

spanner or socket

INSTALLATION MAY

REQUIRE 2 PEOPLE

Summary of content (20 pages)

PAGE 1
BT8223 DOUBLE ARM FLAT SCREEN MOUNT FOR EXTRA LARGE SCREENS INSTALLATION GUIDE & PARTS LIST This Pack Contains 1 Mount PLEASE KEEP THIS FOR FUTURE REFERENCE FEATURES ● ● Designed for flat screens up to 65” (165cm) / 60kg (132lbs) Fits screens with VESA & Non-VESA mounting patterns up to 790mm (31.
PAGE 2
INSTALLATION SAFETY INSTRUCTIONS CAUTION: This wall mount is intended for use only with the maximum weights indicated. Use with flat screen heavier than the maximum indicated may result in instability causing possible injury. Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference.
PAGE 3
CS Spole nost B-Tech International Ltd. doporu uje provést instalaci tohoto produktu prost ednictvím odborného instalátora AV i jinak zp sobilé osoby. Spole nost B-Tech International Ltd, její distributo i a prodejci nenesou odpov dnost za škody nebo zran ní zp sobená nevhodnou instalací. Tento výrobek je nutno umístit do vhodné konstrukce a používat jen po uvedenou maximální výšku. DE B-Tech International Ltd.
PAGE 4
BT8223 PARTS LIST WALL PLATE & ARM ASSEMBLY INTERFACE ASSEMBLY 9 1 18 17 3 11 4 8 5 15 6 17 2 7 13 10 9 11 14 12 Suitable for loads up to 60kg (132lbs) 8 19 16 19 4
PAGE 5
20 21 22 WALL FIXING KIT REF PART NAME QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 WALL PLATE FIXING PLATE WALL ARM ARM TILT PLATE HOOK PLATE CROSS RAIL INTERFACE ARM ARM COVER M10 x 25mm HEX SCREW M8 x 20mm HEX SCREW TILT ADJUSTMENT HAND LEVER M8 NUT M8 METAL WASHER M6 x 8mm HEX SCREW PLASTIC CAP M4 x 12mm WOOD SCREW ADJUSTMENT FIXING PLATE M6 x 15mm SCREW 5mm HEX KEY (FOR PART 11) 6mm HEX KEY (FOR PART 10) 13mm/17mm SPANNER (FOR PARTS A1 & 13) 1 1 1 1 1 1 2 2 2 4 8 1 2 2 6 4 8 2
PAGE 6
INSTALLATION INSTRUCTIONS 1 OPTIONAL: To adjust position of the wall arm on the wall plate, remove parts 10 and 18. Then move fixing plate to desired position, then re-attach parts 10 and 18.
PAGE 7
2 Fix wall plate to the wall using one of the following methods. i. Brick / concrete walls.
PAGE 8
ii. Wood / wood stud walls.
PAGE 9
OPTIONAL : For horizontal fixings between 380mm and 140mm, remove interface arms and attach in the vacant position closer to the centre of the interface. 19 19 8 8 8 7 7 8 7 3 Attach interface to screen. i. Adjust interface arms to suit the flat screen's fixing pattern.
PAGE 10
ii. Attach the interface arms to the flat screen.
PAGE 11
4 Hook the screen onto the tilt plate.
PAGE 12
ii. Level screen then fix in place using parts 13 & 14.
PAGE 13
5 Attach plastic caps (parts 16) to the cross rails (parts 7). 7 16 16 FLAT SCREEN 16 7 6 Cable management. i.
PAGE 14
ii. Unscrew arm covers, insert cable then re-attach arm covers. 9 3 A. 17 FLAT SCREEN 9 WALL CABLE 9 B. CABLE WARNING: Ensure arm is fully extended before connecting cables. 9 C. 17 9 CAUTION: Ensure there is adequate cable slack for movement of the screen, and that cables will not be pinched when the mount is closed.
PAGE 15
7 Loosen the tilt adjustment hand lever to adjust tilt, then retighten to fix position.
PAGE 16
8 To fix the cantilever arm position, tighten parts 11.
PAGE 17
8 OPTIONAL: For minor lateral adjustment, loosen part 10, then slide fixing plate to suitable position. 21 10 WARNING Only loosen screws.
PAGE 18
BT8223 PRODUCT DIMENSIONS MAX 18 705mm 27.8" MIN 145mm 5.7" THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
PAGE 19
BT8223 PRODUCT DIMENSIONS 410mm 16.1" 90mm 3.5" 230mm 9.1" 380mm 15" 90mm 3.5" WALL PLATE 500mm 19.7" 430mm 16.9" 550mm 21.7" MAX 545mm 21.5" 508mm 20" INTERFACE 790mm MAX 31.1" 140mm MIN 5.5" 820mm 32.3" THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
PAGE 20
www.btechavmounts.com B-TECH AUDIO VIDEO MOUNTS HEAD OFFICE Bennett House, Long March, Daventry, Northants NN11 4NR, UK Email: info@btechavmounts.co.uk EUROPE Brixtonlaan 32, Zaventem 1930, Brussels, Belgium Email: info@btechproav.com NORTH AMERICA 203 Eggert Road, Buffalo, NY 14215, USA Email: info@btechavmounts.com SINGAPORE Ruby Industrial Complex, Singapore 347740 Email: info@btechavmounts.com.sg ©2010 Bennett Technologies Limited. All rights reserved.