Go BT7871 ADAPTER PLATE FOR MOUNTING VIDEO BARS Bb INSTALLATION GUIDE B-TECH AV MOUNTS SPECIFICATIONS + Designed to mount video bars to a varlet of B-Tech products + Suitable for use with the following UC/VC equipment; Bose Video bar VB1, Sabra Canasta 50, Neat.Bar, Neat.
CONTENTS Installation Safety Notes... Parts List Installation Options... Video Bar Installation: SABRA CANASTA 0. INSTALLATION SAFETY INSTRUCTIONS CACTI ON « This mount is Intended for use only with the maximum weights indicated. Use with equipment heavier than the maximum Indicated may result In instability causing possible injury. Do not attempt ta Install this product until all Instructions and wakings have been read and properly understood. keep these Instructions for future reference.
FOREPARTS LIST PLEASE KEEP THS FORFEITURE REFERENCE TEM DESCRIPTION ADAPTER PLATE M8 x 12mm CSK HEX SCREW M4 x 6mm HEX SOCKET BUTTON HEAD SCREW M4 x 10mm HEX SOCKET BUTTON HEAD SCREW 2.5AF x L55mm HEX KEY “aa SAF x L60mm HEX KEY Suitable for loads up te 3kg {6.
INSTALLATION OPTIONS 1 . ATTACH THE MOUNTING PLATE TO A B-TECH MOUNT 1. RAIL MOUNTING Fix tem 1 to a Accessory Mounting Arm using item 2. MOUNTING ARM Il, POLE MOUNTING Use an Accessory Collar (BT7052/BT7841) to mount fem Tonto a @50mm Pole (BT7850/BT4116/8T4118} using tem 2. ACCESSORY COLLAR IIL. COLUMN MOUNTING *Note: A BTR385-RTC Is Insert 2.x sliding nuts (supplied with column) into the front channels of the required to mount the Column (BT8380/ BT8381%) and then fix item 1 to the column using item 2.
VIDEO BAR INSTALLATION OPTIONS 2A MOUNTING A SABRA CANASTA 50 Using item 4 fix the Sabra Canasta to fem 1. SABRA CANASTA 50 VIDEO BAR Note: Refer to the BT8371 dimensions on page 17 for more information on which mounting holes to use on the adapter plate.
2B. MOUNTING A BOSE VIDEO BAR VB1 Using item 3 and the integrated mounting brackets supplied on the Bose VB1, fix the video bar to item 7. Note: Refer to the BT8371 dimensions on page 11 for more information on which mounting holes to use on the adapter plate.
2C MOUNTING A NEAT.BAR / NEAT.BAR PRO "1. Using item 2 attach the Neat.Bar mounting bracket to item 1. Note: Refer to the BT8371 dimensions on page 11 for more Information on which mounting holes to use on the adapter plate. Column Installation Shown NEAT BAR MOUNTING BRACKET Ti. Slide the Neat.Bar onto the mounting bracket.
MOUNTING A POLY STUDIO X50 "Attach the Poly Studio to item 7 using item 4. Example Note: Refer to the BT8371 dimensions on page 77 for more Column Installation Inflammation on which mounting holes to use on the adapter plate. Shown POLY STUDIO VIDEO BAR I. For a +25° tilt attach the Poly Studio mounting plate® to fem 1 using item 3. POLY STUDIO IL. Hook the Poly Studio onto the mount.
& CONTACT: ©2022 B-Tech International Design and Manufacturing Ltd. All rights reserved, B-Tech AV Mounts Is a division of B-Tech International Design and Manufacturing Ltd. B-Tech AV Mounts and the B-Tech logo are registered trade marks. All thee brands and product names are trademarks of their respective owners, Photographs are for illustrative purposes only. OBOE. AMA-RT7471-V1-PRORX-0722-57 MADE IN THE UK @ @ For More Information Visit www.btechavmounts.
