Installation guide

ManualsBrandsB-Tech ManualsTVs & monitorsBT7508

B-TECH AUDIO VIDEO MOUNTS

www.btechavmounts.com

CONTENTS

INSTALLATION TOOLS REQUIRED

FEATURES

BT7508

UNIVERSAL FLAT SCREEN INTERFACE KIT

INSTALLATION GUIDE & PARTS LIST

This Pack Contains 1 Interface Kit

Installation Safety Notes.....................................................................................................................2

Parts List.............................................................................................................................................4

Installation Instructions.......................................................................................................................6

Sample Installations..........................................................................................................................10

Product Dimensions..........................................................................................................................11

B-Tech Contact Details.....................................................................................................................12

PLEASE KEEP THIS FOR FUTURE REFERENCE

Wall / ceiling mount

sold separately

Actual weight limit

dependant on mount to which

BT7508 is attached

3mm Hex

Key (Supplied)

5mm Hex

Key (Supplied)

● Designed for screens up to 50” (127cm) / 60kg (132lbs)

● Universal interface kit fixes non-VESA screens to

VESA 200 x 200mm mounts

● Maximum distance between mounting fixings on the rear of the screen:

Vertical 442mm (17.4”) – Horizontal 700mm (27.5”)

● Must be used with 200 x 200mm screen mount

(e.g. BT7507 / BT7532 / BT7533 / BT7534 / BT7535)

● Simple installation with all mounting hardware included

Summary of content (12 pages)

PAGE 1
BT7508 UNIVERSAL FLAT SCREEN INTERFACE KIT INSTALLATION GUIDE & PARTS LIST This Pack Contains 1 Interface Kit PLEASE KEEP THIS FOR FUTURE REFERENCE FEATURES ● ● Designed for screens up to 50” (127cm) / 60kg (132lbs) Universal interface kit fixes non-VESA screens to VESA 200 x 200mm mounts ● Maximum distance between mounting fixings on the rear of the screen: Vertical 442mm (17.4”) – Horizontal 700mm (27.5”) ● Must be used with 200 x 200mm screen mount (e.g.
PAGE 2
INSTALLATION SAFETY INSTRUCTIONS CAUTION: This interface kit is intended for use only with the maximum weights indicated. Use with flat screens heavier than the maximum indicated may result in instability causing possible injury. Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference.
PAGE 3
CS Společnost B-Tech International Ltd. doporučuje provést instalaci tohoto produktu prostřednictvím odborného instalátora AV či jinak způsobilé osoby. Společnost B-Tech International Ltd, její distributoři a prodejci nenesou odpovědnost za škody nebo zranění způsobená nevhodnou instalací. Tento výrobek je nutno umístit do vhodné konstrukce a používat jen po uvedenou maximální výšku. DE B-Tech International Ltd.
PAGE 4
BT7508 PARTS LIST 1 2 1 2 4 3 Suitable for loads up to 60kg (132lbs) 4
PAGE 5
FLAT SCREEN INTERFACE KIT (FOR ATTACHING MOUNT TO BACK OF FLAT SCREEN) A B C D REF PART NAME QTY 1 INTERFACE ARM 2 2 CROSS RAIL 2 3 M5 x 12mm HEX SCREW 8 4 M5 METAL WASHER 4 5 6 3mm HEX KEY 1 (FOR PART 3) 5mm HEX KEY (FOR PARTS A,B,C & D) 1 INTERFACE KIT E F 5 A M8 x 15mm SCREW 4 B M8 x 25mm SCREW 4 C M8 x 40mm SCREW 4 D M8 x 50mm SCREW 4 E M8 x 13mm SPACER 4 F M8 x 24mm SPACER 4 6 PLEASE KEEP THIS FOR FUTURE REFERENCE 5
PAGE 6
INSTALLATION INSTRUCTIONS 1 Slide the interface arms onto the cross rails.
PAGE 7
2 Fix the interface arms to the flat screen. 6 1 TO P A B C D 2 TT BO 1 OM FLAT SCREEN Use spacers on recess in flat screen & for extra space for cables. E F INTERFACE ARM SCREW WASHER FLAT SCREEN RECESS SPACER Please refer to screen manufacturer manual for guidance on screen mounting.
PAGE 8
3 Fix a 200 x 200mm VESA plate (sold separately) to the cross rails.
PAGE 9
4 Fix the interface arms to the cross rails.
PAGE 10
SAMPLE INSTALLATIONS BT7508 BT7508 BT7532 BT7507 BT7508 BT7534 10 BT7508 BT7535
PAGE 11
700mm 27.6" MIN 150mm 5.9" MAX 723mm 28.5" 20mm 0.8" 465mm 18.3" MAX 200mm 7.9" MAX 442mm 17.4" BT7508 PRODUCT DIMENSIONS THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
PAGE 12
www.btechavmounts.com B-TECH AUDIO VIDEO MOUNTS HEAD OFFICE Bennett House, Long March, Daventry, Northants NN11 4NR, UK Email: info@btechavmounts.co.uk EUROPE Brixtonlaan 32, Zaventem 1930, Brussels, Belgium Email: info@btechproav.com NORTH AMERICA 203 Eggert Road, Buffalo, NY 14215, USA Email: info@btechavmounts.com SINGAPORE Ruby Industrial Complex, Singapore 347740 Email: info@btechavmounts.com.sg ©2010 Bennett Technologies Limited. All rights reserved.