Installation guide

ManualsBrandsB-Tech ManualsTVs & monitorsBT7372

B-TECH AUDIO VIDEO MOUNTS

www.btechavmounts.com

CONTENTS

INSTALLATION TOOLS REQUIRED

FEATURES

BT7372

DESK MOUNT WITH SINGLE ARM

INSTALLATION GUIDE & PARTS LIST

This Pack Contains 1 Desk Mount

Crosshead

screwdriver

Installation Safety Notes.....................................................................................................................2

Parts List.............................................................................................................................................4

Installation Instructions.......................................................................................................................6

Product Dimensions..........................................................................................................................15

B-Tech Contact Details.....................................................................................................................16

PLEASE KEEP THIS FOR FUTURE REFERENCE

2.5mm Hex Key

(Supplied)

4mm Hex Key

(Supplied)

● Designed for screens up to 24" (61cm) / 9kg (20lbs)

● Fits screens with VESA mounting patterns:

75 x 75mm and 100 x 100mm

● Optional desk clamp and grommet included

● Easy tilt adjustment +/-40° tilt

● Maximum extension is 285mm (11.2")

● Features two swivel points: 360° at pole

and 180° at interface

● Simple installation with all mounting hardware included

REGISTERED DESIGN NO. 001713280-0039

Summary of content (16 pages)

PAGE 1
BT7372 DESK MOUNT WITH SINGLE ARM INSTALLATION GUIDE & PARTS LIST This Pack Contains 1 Desk Mount PLEASE KEEP THIS FOR FUTURE REFERENCE FEATURES ● Designed for screens up to 24" (61cm) / 9kg (20lbs) ● Fits screens with VESA mounting patterns: ● Optional desk clamp and grommet included ● Easy tilt adjustment +/-40° tilt 75 x 75mm and 100 x 100mm ● Maximum extension is 285mm (11.
PAGE 2
PAGE 3
CS Společnost B-Tech International Ltd. doporučuje provést instalaci tohoto produktu prostřednictvím odborného instalátora AV či jinak způsobilé osoby. Společnost B-Tech International Ltd, její distributoři a prodejci nenesou odpovědnost za škody nebo zranění způsobená nevhodnou instalací. Tento výrobek je nutno umístit do vhodné konstrukce a používat jen po uvedenou maximální výšku. DE B-Tech International Ltd.
PAGE 4
BT7372 PARTS LIST 9 21 1 9 17 2 GROMMET CLAMP 15 23 10 11 22 3 6 13 14 4 16 5 11 11 12 6 13 7 4 8 Suitable for loads up to 9kg (20lbs)
PAGE 5
REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 18 19 20 A B C D E A 24 25 PART NAME INTERFACE ASSEMBLY ARM HEIGHT ADJUSTMENT COLLAR POLE ASSEMBLY TOP CLAMP CLAMP PLATE BOTTOM CLAMP SHORT HANDW HEEL M6 x 15mm HEX SCREW M5 x 5mm GRUB SCREW M6 x 10mm HEX SCREW M10 E-RING M10 METAL W ASHER M10 NUT GROMMET PLATE LONG HANDW HEEL POLE END CAP CABLE CLIP CIRCULAR FOAM PAD RECTANGULAR FOAM PAD PLASTIC CAP M6 x 10mm SCREW M6 METAL W ASHER CABLE TIE 2.
PAGE 6
INSTALLATION INSTRUCTIONS Choose a preferred mounting method. i. Clamp (page 6) ii. Grommet (page 8) 1 i. Desk clamp option. 4 5 11 19 12 20 Max 70mm (2.
PAGE 7
Attach the foam pads to the underside of the clamp base. 19 20 Place the mount over edge of the desk and tighten the short handwheel.
PAGE 8
ii. Grommet Clamp 4 15 11 19 20 6 13 14 16 Max 95mm (3.
PAGE 9
Remove the desk clamp and attach the grommet plate. Then attach the foam pads onto the grommet plate. 26 26 20 19 11 15 11 5 4 4 Place the mount over the cable management hole and screw the handwheel into the grommet plate, then tighten the nut to clamp the desk.
PAGE 10
2 Attach the interface plate to the flat screen. E 2 A B C D 1 T OP T BOT OM FLAT SCREEN 3 To lock height of adjustment collar, hold the top of the collar and rotate the lower part of the adjustment collar.
PAGE 11
4 Slide the flat screen and arms onto the pole, adjust height, then tighten the grub screw. i. 2 FLAT SCREEN 4 3 iii. LOCK COLLAR UNLOCK COLLAR ii.
PAGE 12
5 OPTIONAL : Cable Management. Insert the cable into the cable management slots on the underside of the arm. WARNING: Ensure arm is fully extended before connecting cables. FLAT SCREEN CABLE 2 4 18 CABLE CABLE 12 CAUTION: Ensure there is adequate cable slack for movement of the screen, and that cables will not be pinched when the mount is closed.
PAGE 13
6 To increase tilt resistance, tighten part 9. +/-40° 26 9 M8 nyloc nut If this does not hold the screen at the required tilt, remove the flat screen from the interface. Then remove plastic nut cover and tighten the M8 nyloc nut.
PAGE 14
7 Tilt and swivel.
PAGE 15
BT7372 PRODUCT DIMENSIONS 110mm 4.3" 83.7mm 3.3" 325mm 12.8" 100mm 3.9" 75mm 3" 100mm 3.9" 75mm 3" 95mm 3.7" MAX 70mm 2.8" 72mm 2.8" MAX 95mm 3.7" INTERFACE PLATE 30mm 1.2" DESK CLAMP, GROMMET & BASE 169mm 6.7" 120mm 4.7" 165mm 6.5" MIN 35mm 1.4" 305mm 12" 400mm 15.7" O 285mm 11.2" MAX MAX 120mm 4.7" THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
PAGE 16
www.btechavmounts.com B-TECH AUDIO VIDEO MOUNTS HEAD OFFICE Bennett House, Long March, Daventry, Northants., NN11 4NR, UK Email: info@btechavmounts.co.uk EUROPE BELGIUM Brixtonlaan 32, Zaventem 1930, Brussels, Belgium Email: info@btechproav.com NORTH AMERICA 203 Eggert Road, Buffalo, NY 14215, USA Email: info@btechavmounts.com GERMANY Dyrotzer Weg 26A, 14612 Falkensee, Berlin, Germany Email: info@btechdeutschland.de SINGAPORE Ruby Industrial Complex, Singapore 347740 Email: info@btechavmounts.com.