Analogue HD Montior User manual
IMPORTANT SAFETY INFORMATION Table of contents ENVIRONMENT Important Safety Information In The Box Connections Rear Interface Control Layout How to Connect Your Monitor On-Screen Display (OSD) Operation HDA1/2 Input Configuration HDMI Input Configuration HDA/HDMI Support list 2 4 4 4 5 5 6 7 8 9 • • • Do not install the monitor outdoors or in any hostile environment. To prevent fire or electric shock, do not expose the monitor to rain or moisture.
USING A WALL MOUNT Caution: Any wall mount must bear a minimum of 5x the monitor’s net weight to mount safely. The stand must be removed first before mounting this way. 1. Place the monitor face down on a surface that is soft, yet strong enough to hold the monitor. 2. Use a screwdriver to remove the screws from the four holes on each side of the bottom of the monitor’s base. 3. Make sure all cables are already connected to the monitor. 4.
CONTROL LAYOUT BASIC ON-SCREEN DISPLAY SETUP The control buttons are located on the right hand rear side of the monitor. 1. To access the OSD Menu press ‘MENU’. 2. Use the ‘SOURCE’ buttons to select the required menu item, then press the ‘＋’ or ‘－’button to select the Sub menu. SOURCE MENU SOURCE: MENU: ＋ and －: POWER: - + POWER Select input mode – HDA1,HDA2, HDMI. Access the On Screen Display (OSD) menu. Controls left/right, Change the size of the value. Turns the monitor on or off.
HDA1/HDA2 Input Configuration 3. Information 1.PICTURE Picture Brightness 50 Picture Menu Contrast 50 Menu Information Saturation 50 Information Hue 50 Setting the image brightness (0-100). Setting the image contrast (0–100). Setting the image Saturation (0–100). Setting the image hue (0–100). 2.MENU Picture Menu Information CVI 720P25 Exit Exit Picture: Contrast: Saturation： Hue: HDA1 Language OSD H Pos. OSD V Pos.
Brand 2.MENU Picture Menu Information Language OSD H Pos. OSD V Pos. OSD Time Reset Language: OSD H Pos.: OSD V Pos.: OSD Time: Reset: DH-HAC-HDW1120E English 50 50 20 > Exit Model HD-HAC-HDW1020E Dahua OSD language selection. OSD horizontal position adjustment(0-100). OSD Vorizontal position adjustment(0-100). OSD display dwell time selection (5-30 seconds). OSD setting data recovery factory settings. HD-HAC-HFW1200M-I1 DH-HAC-HFW1400M-I1 3.
HDMI-supported DVR/NVR brand and mode list has been tested Dahua/HIKVISION/XM/TVT/Uniview/WAPA/TOPSEE/Sunell Resolution 800X600 1024X768 1280X720 1280X800 1280X1024 1366X768 1440X900 1600X1200 1920X1080 2560x1440 Frequency（Hz） 60 60 50/60 60 60 60 60 60 24/25/30/50/60 30/60 END 11.
