Datasheet

p. /3
6014P
Ordering chart for valves (other versions on requests)
All valves with FKM seal and manual override, without cable plug
Anodised aluminium banjo coupler, nickel-plated brass banjo bolt
Circuit function Pressure inlet P (banjo coupler) Service port A (banjo bolt) Orice [mm] QNn value air [l/min] Material ange body Pressure range [bar] Power consumption [W]
Item no. per voltage/frequency
[V/Hz]
024/DC 024/50 230/50
C 3/2-way, normally
closed (NC)
G 1/4 G 1/8 1.5 75 PA 0-6 2 424 123 424 124 424 127
G 1/4 1.5 75 PA 0-6 2 424 118 424 119 424 122
G 1/8 2.0 120 Brass 0-10 8 424 113 424 114 424 117
G 1/4 2.0 120 Brass 0-10 8 424 103 424 104 424 107
Please note that the cable plug has to be ordered separately, see separate datasheet for Type 2508.
&URTHERôVERSIONSôONôREQUEST
I
Approvals
ATEX Version (Encapsulation and intrinsically safe)
UR / UL / CSA
Materials
Flange body in stainless steel
Circuit function Pressure inlet P (banjo coupler) Service port A (banjo bolt) Orice [mm] QNn value air [l/min] Material ange body Pressure range [bar] Power consumption [W]
Item no. per voltage/frequency
[V/Hz]
024/DC 024/50 230/50
C 3/2-Wege-Ventil,
NC
G 1/8 G 1/4 1.5 75 PA 0-10 5 784 710 784 711 784 713
G 1/8 G 1/4 2.0 120 PA 0-10 8 784 706 784 707 784 709
G 1/8 G 1/4 2.5 174 PA 0-6 8 786 014 – 786 015
Ordering chart for valves (other versions on requests)
All valves with PA body, FKM seal and manual override, without cable plug
IXEF
®
banjo coupler, anodised aluminium banjo bolt
Ordering chart for accessory
Cable plug Type 2508 according to DIN EN 175301-803 Form A
Circuitry Voltage / frequency Item no.
None (standard) 0 - 250 V AC/DC 008 376
further versions see datasheet Type 2508
The delivery of a cable plug includes the at seal and the xing screw. For other cable plug versions acc. to DIN EN
175301-803 Form A (previously DIN 43650), see Accessories p. 116 or separate datasheet Type 2508.
Flat seal
Fixing screw