Data Sheet

ManualsBrandsBÜRKERT ManualsMagnetic Valves008376

2508

p. 1/6www.burkert.com

Cable Plug acc. to DIN EN

175301 - 803, Form A

Plug for the connection of electrical compo-

nents according to DIN EN 175301 - 803

(previously DIN 43650, Form A).

Standard version without circuit, with LED,

varistor, rectiﬁer, pole protection- or/and free-

wheeling diode.

Variants with HL-circuit to increase perfor-

mance of solenoid valves, LR-circuit to de-

crease power consumption and IN-circuit for

control of impulse coils.

• Complete program

• Contact form 18 mm

• Also available with LED indicator

• Optional 4 pin version for pressure switch or

impulse valves respectively

• Versions with high-power, power

reduction and inverter for impulse valves

Technical data

Body material

Polyamide, polycarbonate (version with LED)

Contact material

Brass, silver-plated

Max. continuous temperature

+ 90 °C (- 10 … + 55 °C by version HL, LR and IN)

Cable diameter

6 - 7 mm (other diameter on request)

Cable outlet

Can be rotated through 4 × 90°

Contact distance

18 mm according to DIN EN 175301 - 803

(previously DIN 43650, Form A)

Functional display

LED, colour red (optional), yellow with version HL and LR

Electrical connection

Screw terminal

Max. 1.5 mm

Nominal voltage

Depending on version

Contact resistance

5 mΩ (typ.)

Protection class

IP65

Number of terminals

Standard

Option

2 pins + protective earth conductor

3 pins + protective earth conductor

Summary of content (6 pages)

PAGE 1
2508 Cable Plug acc. to DIN EN 175301 - 803, Form A • Complete program • Contact form 18 mm • Also available with LED indicator • Optional 4 pin version for pressure switch or impulse valves respectively • Versions with high-power, power reduction and inverter for impulse valves Plug for the connection of electrical components according to DIN EN 175301 - 803 (previously DIN 43650, Form A).
PAGE 2
508 Ordering chart The delivery of a cable plug includes the flat seal and the steel fixing screw (thick-film-passivated); in the case of stainless steel valves we recommend a cable plug with a stainless steel screw (see ordering chart without circuit, or on request) Article no. without cable Article no. 1 m cable Article no. 3 m cable 0 to 250 V AC/DC with steel screw max. 6 A 008376  783590  783573  0 to 250 V AC/DC with stainless steel screw max.
PAGE 3
2508 Ordering chart Included in delivery is a connector with flat seal and fixing screw. Voltage Current rating Article no. without cable Article no. 1 m cable Article no. 3 m cable with LED and varistor 12 to 24 V AC/DC max. 6 A 008367  783578  783579  100 to 120 V AC/DC max. 6 A 008368  783580  783581  200 to 240 V AC/DC max. 6 A 008369  783582  783583  Article no. without cable Article no. 1 m cable Article no. 3 m cable max.
PAGE 4
2508 Ordering chart The delivery of a cable plug includes the flat seal and the steel fixing screw (thick-film-passivated); in the case of stainless steel valves a cable plug with a stainless steel screw is recommended (on request). With high power electronics Type 2508 HL (-)GND (+) Technical data Article no. Operating voltage Unom 12 - 24 V DC Supply voltage acc. to IEC 364 - 4- 41 (PELV) Max. current 3 A (inrush), 0.2 A (holding operation) Inrush power (4xPnom) depending on valve max.
PAGE 5
2508 Ordering chart The delivery of a cable plug includes the flat seal and the steel fixing screw (thick-film-passivated); in the case of stainless steel valves a cable plug with a stainless steel screw is recommended (on request). With inverter electronics Type 2508 IN Technical data Operating voltage Unom Article no. 6 - 24 V DC Supply voltage acc. to IEC 364 - 4- 41 (PELV) Max. coil current 0.6 A (100 % ED); 1.2 A (50 % ED); Max. impulse length 300 ms (at > 0.
PAGE 6
2508 i Further versions on request Material with EPDM or Silikon flat seal Additional Versions with 1 or 3 m cable For other cable diameter With blue coloured union nut for intrinsically safe solenoid valves Connector for aggressive ambient with polypropylene Mounting Instructions Versions with LED Standard version (without electronics) gasket NBR (EPDM on request) contact insert pan screw M3 × 30 transparent cover (polycarbonate) gasket contact insert pan screw M3 X 30 pressure ring black cover (po