User's Manual

Product Brief – Airborne SDIO/SPI 802.11b/g Radio Quatech, Inc.
846-8310-240 June 2010 31
13.0 Change Log
The following table indicates all changes made to this document:
Version
Date
Section
Change Description
Author
A
2/11/2007
-
Internal Release
ACR
B
2/19/2007
4.0
Updated Table 2.0
ACR
1.3
3/12/2008
-
Changed revision numbering from Alpha to Numeric
ACR
2.0
Updated block diagram to remove BT RF connector.
4.0
Updated Table 2.0 to reflect updated pin out.
Updated Connector reference diagram to remove BT connector.
7.0
Updated Fig 2.0 to remove BT U.FL connector.
1.4
3/21/2008
4.0
Updated Table 2.0
ACR
5.0
Updated Table 6.0, 7.0 and 10 with tested values.
Updated notes.
7.0
Updated Fig 2.0 mechanical Outline with new pin #1 identifier.
8.0
Added section
9.0
Added section
1.5
5/8/2008
1.0
Fig 1.0 updated to actual radio image.
ACR
8.0
Fig 3.0 was updated to reflect 10K ohm resistor and modified
population table.
1.6
6/31/2008
7.0
Added Bluetooth Coexistence Interface section.
ACR
9/17/2008
8.0
Added GSPI Section, incremented all sections above.
1.7
11/21/2008
Title
Updated title to include product part number
ACR
4.0
Updated tables 2.0 and 4.0 to correct issues with SPI interface
description.
8.1
Updated Fig 2 & 3 to reflect changes to SPI interface description.
2.0
3/31/09
Title
Removed „Preliminary‟
ACR
5.0
Updated Table 10 with RevB test data.
11.0
Typographical correction
2.1
6/17/2009
5.0
Added Note 2 to Table 5.0
ACR
10.4
Changed Figure reference to identify correct diagram.
11.0
Deleted RESETSection.
2.2
1/31/2010
3.0
Note 1 of Table 1: Correct pin reference from pin 6 to pin 5.
ACR
10.0
Updated mounting hardware reference.
2.3
6/22/2010
12
Updated with FCC/IC regulatory information upon approval.
CHM
2.4
6/28/2010
12
Added SAR certification notice.
Changed FCC/IC approval to limited modular.
ACR