User's Manual

Product Brief – Airborne SDIO/SPI 802.11b/g Radio Quatech, Inc.
846-8310-240 June 2010 29
12.3 RF Exposure Information
The radio module has been evaluated under FCC Bulletin OET 65C (01-01) and
found to be compliant to the requirements as set forth in CFR 47 Sections,
2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency
devices. This model meets the applicable government requirements for exposure
to radio frequency waves. The highest SAR level measured for this device was
0.993 W/kg (802.11b) and 0.442 W/Kg (802.11g).
For the limited modular approval if the device is used less than 20 cm from
persons (i.e. portable) then the antenna must be mounted outside of the host. If
the device is used more than 20cm from persons (i.e. mobile) then the antenna
does not need to be mounted outside of the host.
Certified antennas include:
Company
Description
Part No.
L-Com
2.2 dBi Omni-directional, 2.4GHz, RP-SMA,
Rubber Duck
HG2402RD-RSF
12.4 Information for Canadian Users (IC Notice)
This device has been designed to operate with an antenna having a maximum
gain of 5dBi for 802.11b/g band. An antenna having a higher gain is strictly
prohibited per regulations of Industry Canada. The required antenna impedance
is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (EIRP)
is not more than required for successful communication.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
12.5 FCC/IOC Limited Modular Approval
This document describes the Airborne WLN FCC limited modular approval and
the guidelines for use as outlined in FCC Public Notice (DA-00-1407A1).
The WLRG-RA-DP601 is covered by the following limited modular grants:
Country
Standard
Grant
North America (US)
FCC Part 15
Sec. 15.107, 15.109, 15.207, 15.209, 15.247
Modular Approval
F4AWLRG601
Canada
RSS 210
Modular Approval
3913A-WLRG601
By providing FCC limited modular approval on the Airborne radio modules, our
customers are relieved of any need to perform FCC part15 subpart C Intentional