User's Manual
Table Of Contents
- _
- Figures
- Tables
- _
- Introduction
- _
- Making connections
- _
- Enabling Wi-Fi Device Servers
- Installing the device drivers
- _
- Configuring the SDS using the Web interface
- _
- Troubleshooting and Maintaining an SDS
- Appendix A
- Appendix B
- Appendix C
Installing the device drivers Quatech SDS User’s Manual
Figure 38 - Locate the Serial Device Server options screen
Figure 38 illustrates the
Locate the Serial Device Server
screen. You can either connect
the SDS to a local hub or
switch or you can connect it
directly to your computer.
Step Procedure Description
Step 48 Select one of two options:
¾ I’ll plug the SDS unit into a local
subnet hub or switch. Press Next to
continue.
¾ I’ll connect the SDS directly to my
computer. Press Next to continue.
The Locate the Serial Device Server local
discovery screen displays.
Continue
with □ Step 49.
The Locate the Serial Device Server
screen displays.
Go to
□ Step 43.
Figure 39 - Locate the Serial Device Server local discovery screen
Figure 39 illustrates the Locate
the Serial Device Server local
discovery prompt.
Step Procedure Description
Step 49 Connect the SDS to a local hub or switch. Use a standard Ethernet cable to connect
the Ethernet port on the SDS to the hub
or switch.
Continue with □ Step 50.
Page 40 940-0183-151 March 2005