User's Manual
Table Of Contents
- _
- Figures
- Tables
- _
- Introduction
- _
- Making connections
- _
- Enabling Wi-Fi Device Servers
- Installing the device drivers
- _
- Configuring the SDS using the Web interface
- _
- Troubleshooting and Maintaining an SDS
- Appendix A
- Appendix B
- Appendix C
Quatech SDS User’s Manual Installing the device drivers
Figure 35 - Locate the Serial Device Server using direct discovery screen
Figure 35 explains how to
connect the SDS to your
computer for location and
configuration purposes.
Step Procedure Description
Step 43 Connect the Ethernet port on your SDS to
the Network Interface Connection (NIC)
on your computer using an Ethernet
crossover patch cable.
Continue with □ Step 44.
Step 44 Connect power to the SDS and confirm
that it is ready to proceed.
Press Next to continue.
The Status LED should glow green.
The Search network for Serial Device
Drivers screen displays.
Go to
□ Step 10.
March 2005 940-0183-151 Page 37