User's Manual
Table Of Contents
- _
- Figures
- Tables
- _
- Introduction
- _
- Making connections
- _
- Enabling Wi-Fi Device Servers
- Installing the device drivers
- _
- Configuring the SDS using the Web interface
- _
- Troubleshooting and Maintaining an SDS
- Appendix A
- Appendix B
- Appendix C
Installing the device drivers Quatech SDS User’s Manual
Figure 18 - TCP/IP Network Configuration Parameters screen
Step Procedure Description
Step 22 Press the Next button to continue. The Rerun network connectivity test pop-
up box displays.
Continue with □ Step 23.
Figure 19 - Rerun network connectivity test pop-up box
Step Procedure Description
Step 23 Press the OK button to continue. The Network Connectivity Test screen
displays.
Continue with □ Step 24.
Figure 19 shows the Rerun
network connectivity test pop-
up box.
Figure 18 shows the TCP/IP
network configuration parameters
including the following:
¾ Address type
¾ IP Address
¾ Subnet mask
¾ Default gateway
Page 24 940-0183-151 March 2005