User's Manual

Appe ndix A Quate c h SDS Use r’s Manual
Page 80 Re v 1 .5 0 (3/1 3 /20 0 5)
Appendix A
Specifications
Size
Product Size
SSE/DSE-100/400
4.65” x 3.73” x 1.15” (11.8 x 9.47 x 2.92 cm)
QSE-100
11.55” x 6.27” x 1.71” (29.3 x 15.9 x 4.34 cm)
ESE-100
11.55” x 6.27” x 1.84” (29.3 x 15.9 x 4.67 cm)
LAN interface
10/100 Base T (IEEE 802.3), auto-negotiation and auto MDI/MDIX.
RJ-45 Network connector
Serial interface
! Fully independent ports on multiport models
! DB-9 male, DTE configuration
! “M” models (e.g. QSE-100M) are supplied with 10-pin RJ-45
adapters that attach to the DB-9 connectors
! “W” models (e.g. DSEW-100) are supplied with Wi-Fi transceivers
and capabilities
! Hardware flow control
! Full modem control
RS-232 (EIA-232)
RS-232/ 422/ RS-485
RS-232 # Serial ports RS-232/ 422/ 485
SSE-100 1 SSE-400
DSE-100 2 DSE-400
QSE-100 4 QSE-400
ESE-100 8 ESE-400
Parity, Stop bits: Parity configurable as: None, Even, Odd
Data bits configurable as: 5, 6, 7, 8
Stop bits configurable as: 1, 1.5, 2
Speed: Each serial port supports data transfer speeds of up to 921.6 kbps,
depending on flow control protocols used, cable length and condition,
and other factors. The aggregate throughput of all ports on any given
Device Server may not exceed 4 Mbps.
Note: The surge suppression (–SS) option reduces effective baud
rates to 115.2 Kbps maximum on each port.
Please contact Technical
Support at [e-mail] for additional information.