User's Manual

Quate c h SDS Us e r’s Manual Configuring the SDS using a We b inte rface
Re v 1 .5 0 (3 /1 3/2 00 5 ) Page 71
Managing users
Initially, the SDS is configured to have no exclusive users. This
means that anyone with the device drivers installed and who knows
the SDS’ IP address can use the Web interface to configure and
manage the SDS.
You can create users to restrict this type of access to approved
personnel only. Once you create a user, only someone using that user
ID and password has Web access to the SDS.
Showing users
Step Procedure Description
# Preliminary
Step
Click on Admin in the selection bar and
then select Show Users from the left
panel.
The Show Users screen displays.
Passwords appear as asterisks.
Figure 62 - Show Users screen
Step Procedure Description
# Step 1 Make note of any users you want to add
or delete. Select Add/Del Users to add or
remove users.
Write down the user’s name exactly as it
appears including any spaces.
Adding users
Step Procedure Description
# Preliminary
Step
Click on Admin in the selection bar and
then select Add/Del User from the left
panel.
The Add/Del Users screen displays.
Figure 63 - Add/ Del Users screen
Step Procedure Description
# Step 1 Enter the user name and password in the
boxes provided.
Passwords appear as asterisks.
# Step 2 Select the Add option.
# Step 3 Press the Submit key. A network confirmation prompt displays.
Note: You can create a
maximum of ten users for each
SDS.