User's Manual
Table Of Contents
- T
- Table of contents
- I
- Introduction
- M
- Making connections
- E
- Enabling Wi-Fi Device Servers
- Installing the device drivers
- C
- Configuring the SDS using the Web interface
- T
- Troubleshooting and Maintaining an SDS
- Appendix A
- Appendix B
- Appendix C
Ins talling the de vice drive rs Quate c h SDS Use r’s Manual
Page 42 Re v 1 .5 0 (3/1 3 /20 0 5)
Figure 40 - Select Desired Serial Device Server from list screen
Step Procedure Description
Step 53 Locate and highlight your SDS device.
Press the Next button to continue.
This screen shows a complete list of all
currently available Quatech device
servers.
The Specify IP Address screen displays.
Continue with □ Step 54.
Figure 41 - Specify IP Address screen
Step Procedure Description
Step 54 Enter the IP address for your SDS in the
box provided.
Press the Next button to continue.
If you are not sure of the IP address, see
your system administrator.
The Install the Device Drivers screen
displays.
Go to □ Step 27.
Figure 41 prompts you for the
IP address of your SDS.
Figure 40 shows a complete
list of all the Quatech serial
device servers. This list will
change as the SDS family
grows.