User's Manual
Table Of Contents
- T
- Table of contents
- I
- Introduction
- M
- Making connections
- E
- Enabling Wi-Fi Device Servers
- Installing the device drivers
- C
- Configuring the SDS using the Web interface
- T
- Troubleshooting and Maintaining an SDS
- Appendix A
- Appendix B
- Appendix C
Ins talling the de vice drive rs Quate c h SDS Use r’s Manual
Page 40 Re v 1 .5 0 (3/1 3 /20 0 5)
Figure 38 - Locate the Serial Device Server options screen
Step Procedure Description
Step 48 Select one of two options:
! I’ll plug the SDS unit into a local
subnet hub or switch. Press Next to
continue.
! I’ll connect the SDS directly to my
computer. Press Next to continue.
The Locate the Serial Device Server local
discovery screen displays.
Continue
with □ Step 49.
The Locate the Serial Device Server
screen displays.
Go to □ Step 43.
Figure 39 - Locate the Serial Device Server local discovery screen
Step Procedure Description
Step 49 Connect the SDS to a local hub or switch. Use a standard Ethernet cable to connect
the Ethernet port on the SDS to the hub
or switch.
Continue with □ Step 50.
Figure 39 illustrates the Locate
the Serial Device Server local
discovery prompt.
Figure 38 illustrates the
Locate the Serial Device Server
screen. You can either connect
the SDS to a local hub or
switch or you can connect it
directly to your computer.