User's Manual

Ins talling the de vice drive rs Quate c h SDS Use r’s Manual
Page 32 Re v 1 .5 0 (3/1 3 /20 0 5)
Figure 27 - Internet Protocol (TCP/ IP) Properties dialog box
Step Procedure Description
 Step 32 The Internet Protocol (TCP/IP) Properties
dialog box lets you change the SDS’
configuration so that it can operate in its
permanent location.
Select one of the following options:
! Use the following static IP address.
! Obtain an IP address automatically
from the DHCP server.
If you are not sure of the configuration
parameters, consult your system
administrator.
Note: We recommend that you use a static
IP address to ensure reliable operation.
Continue with □ Step 33.
Go to □ Step 34.
 Step 33 Key in any necessary changes to the:
! IP address,
! Subnet mask, and
! Default gateway.
Your system administrator can provide
you with specific parameters.
 Step 34 Press Send to send your changes to the
SDS.
The Restart confirmation pop-up box
displays.
Continue with □ Step 35.
Figure 27 shows the current
configuration parameters for
the SDS. You can change these
parameters by keying in the
desired values.