User's Manual
Table Of Contents
- T
- Table of contents
- I
- Introduction
- M
- Making connections
- E
- Enabling Wi-Fi Device Servers
- Installing the device drivers
- C
- Configuring the SDS using the Web interface
- T
- Troubleshooting and Maintaining an SDS
- Appendix A
- Appendix B
- Appendix C
Quate c h SDS Us e r’s Manual Intro ductio n
Re v 1 .5 0 (3 /1 3/2 00 5 ) Page 7
Getting started
Unpacking your SDS
Follow these steps to unpack your SDS.
Step Procedure Description
# Step 1 Remove the SDS from the box.
# Step 2 Remove all packing material from the SDS. Save the packaging in case you ever need
to store the unit or return it to Quatech
for service.
# Step 3 Check the contents of the package to make
sure you have received everything listed
below:
! SDS
! Power cable
! Power source
! Ethernet crossover cable
! Loopback connector(s)
! CD-ROM containing the SDS device
drivers and configuration software
! QuickStart guide
The complete SDS package ships in a
single box.
Note: Crossover cables only ship with the
QSE-100 and ESE-100 models.
# Step 4 Check the SDS and accessories for shipping
damage.
Pay particular attention to the SDS’ case
and port connectors. If anything is
missing or damaged, contact your
Quatech sales representative.