B Mobile HK Limited GSM mobile phone QW130 USE MANUAL Content 1 2 3 General Information .................................................................................................................................................4 1.1 Profile.............................................................................................................................................................. 4 1.2 Safety Information ..........................................................................
4 5 3.1 Installing the S-SIM or M-SIM Cards and the Battery ................................................................................. 10 3.2 Installing T-Flash Card.................................................................................................................................. 12 3.3 Charging the Battery ..................................................................................................................................... 13 3.
6 5.6 Tools.............................................................................................................................................................. 30 5.7 Camera .......................................................................................................................................................... 32 5.8 Audio video...................................................................................................................................................
1 1.1 General Information Profile Please read this pamphlet carefully in order to make your phone in perfect condition. The phone is available for WCDMA /GSM network. The card slot：WCDMA/GSM Our company may change this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone. Due to different software and network operators, display on your phone may be different, refer to your phone for details. 1.
Do not use a hand-held phone while driving. Use hands-free fittings when calls are unavoidable while driving. In some countries, dialing or receiving calls while driving is illegal! ¾ SWITCH OFF IN AIRCRAFT Wireless devices can cause interference in aircraft. Using a mobile phone in flight is illegal and risky. Please make sure that your mobile phone is powered off in flight.
Use only approved accessories and batteries. ¾ USE SENSIBLY Use only in a normal and proper manner. ¾ EMERGENCY CALLS Ensure the phone is switched on and in service, enter the emergency number, e.g. 112, then press the send key. Give your location and state your situation briefly. Do not end the call until told to do so. Note: Just like all other mobile phones, this mobile phone does not necessarily support all the features described in this manual due to network or radio transmission problems.
¾ Do not throw, knock or shock the mobile phone, as that will destroy the internal circuits and high-precision components of the mobile phone. 2 2.1 Phone overview 2.
navigate. OK key Press it to confirm your selection. Left and right soft key The bottom line on the screen displays the functions of the Left and Right soft key. Space key Press it in the edit interface to get a blank. Delete key Press it to delete a character before cursor. Linefeed In idle screen, this key helps to switch to another line. Sym key Press it in the edit interface to input a symbol. Shift key（2） Press it to switch between input methods.
Camera shortcut key In idle screen, press it can access camera interface. FM shortcut key In idle screen, press it can access FM interface. Number keys, letter keys Press number keys 1 through 9 in input or edit state to input numbers and characters; Press letter keys A through Z in input or edit state to input letters and characters; When the keypad is locked, you need to press left soft key then * key to unlock. 2.3 Technical specifications Phone Dimensions (W×D×H): 60×110×150mm Weight: 71.
3 3.1 Getting started Installing the S-SIM or M-SIM Cards and the Battery An USIM card carries useful information, including your mobile phone number, PIN (Personal Identification Number), PIN2, PUK (PIN Unlocking Key), PUK2 (PIN2 Unlocking Key), IMSI (International Mobile Subscriber Identity), network information, contacts data, and short messages data. Note: After powering off your mobile phone, wait for a few seconds before removing or inserting an SIM card.
input the correct code and then press the OK key. Phone lock code The phone lock code may be set to prevent your mobile phone from being misused. In general, this code is provided along with the mobile phone by the manufacturer. The initial phone lock code is set to 0000 by the manufacturer. If the phone lock code is set, you need to input the phone lock code when powering on the mobile phone.
PIN2 The PIN2 code (4 to 8 digits), supplied with USIM card, is required to access some functions such as “call costs setup” and “fixed dialing setup”. Please contact the network operator to verify whether your USIM card supports these functions. If you input wrong PIN2 for three times, the PIN2 will be locked. To unlock the PIN2, input the correct PUK2 as follows: -Input the correct PUK2 according to the screen prompt to unlock the PIN2. -Then input the new PIN2 and press the OK key.
To remove the T-flash card, open its latch and slightly press the card inward. The card will automatically pop out. Close the latch. Note: 1. The mobile phone cannot automatically identify the T-flash card being inserted when the mobile phone is powered on. You must power off the mobile phone and then power it on, so that the phone can identify the T-Flash card. 2. The T-Flash card is a miniature object. Keep it out of the reach of children for fear that children swallow it! 3.
Insert the plug of the travel charger to an appropriate power outlet. During the charging, the battery level grids in the battery icon keep flickering till the battery is fully charged. It is normal of the battery to become hot during the charging period. The battery icon does no longer flicker when the charging process ends. Note: Ensure that the plug of the charger, the plug of the earphone, and the plug of the USB cable are inserted in the right direction.
environment close to room temperature. Immediately stop using the battery if the battery produces odor, overheats, cracks, distorts or has other damage, or if the electrolyte leaks. The battery wears out with use. A longer charging time is required as the battery is put into use for a long time. If the total conversation duration decreases but the charging time increases even though the battery is properly charged, purchase a standard battery from the OEM or use a battery approved by our company.
To power off the mobile phone, hold the End key for a while. 3.5 Linking to the Network After the USIM card and the mobile phone are successfully unlocked, the mobile phone automatically searches for an available network. After finding a network, the mobile phone enters the standby state. When the mobile phone is registered in the network, the name of the network operator is displayed on the screen. Then you can dial or receive a call. 3.
including answered calls, missed calls, dialed calls and collection of all calls. With call log, you can trace your call history and redial one of them conveniently. 1), select Call Log on main menu to enter call log management. 2), pressing LEFT/RIGHT key to switch among catalogs: ANSWERED, MISSED, DIALED, ALL CALLS and MOST USED. 3), after switched to target catalog, you can scroll through the list by pressing UP and DOWN key. 4), focus on the contact name which you want, hold and press the send key.
3.6.1.6 Make a video call from call log 1), Select Call Log on main menu to enter call log management. 2), Pressing LEFT/RIGHT key to switch among catalogs: ANSWERED, MISSED, DIALED, ALL CALLS and MOST USED. 3), after switching to target catalog, you can scroll through the list by pressing UP and DOWN key. 4), Focus on the contact name which you want, make sure that it’s a video call number, otherwise, you can’t send video call to this contact and no video call choice on menu for you.
Other operations during incoming call During an incoming call, select OPTIONS on screen to enter sub-menu: Hold-------- Put the call on hold Mute-------- Mute the microphone or speaker, lest that your third party talk should be transmitted from the microphone or speaker. Call log----Open call log during a call for you to query call history, this operation will not suspend or hang up the conversation.
connection between these two device is set up successfully. Not only be used to transfer data, the USB set can also be used to charge, for example, when you connect your phone to PC with USB cable, after recognizing, you can find the batter icon on right top of your phone is in charging status. When the battery is full charged, the battery icon will turn green, and stay frozen. 3.8 Using the Headset It would enter headset mode automatically when you insert headset to the slot.
4.2 Numeric and English Input You can input numbers or letters with the numeric or English input method. Press the shift key to switch between input methods To input a blank, press space key. You can press delete key to delete a wrongly input character. 4.3 Inserting a Symbol Users can press the sym key to access the symbol interface to select a suitable symbol. 5 5.1 Using the menu STK STK service is the tool kit of USIM card. This phone supports the service function .
Browse call log Select Call Log on main menu to enter call log management. 2) Pressing LEFT/RIGHT key to switch among catalogs: ANSWERED, MISSED, DIALED, ALL CALLS and MOST USED. 3) After switching to target catalog, you can scroll through the list by pressing UP and DOWN key. 1) Dial from call log 1) Select Call Log on main menu to enter call log management. 2) Pressing LEFT/RIGHT soft key to switch among catalogs: ANSWERED, MISSED, DIALED, ALL CALLS and MOST USED.
5) Select “Delete” to delete the call log. 5.3 Messages Select MESSAGES on main menu to enter message interface. New 5.3.1.1 Writing message You can type a message or insert a pre-defined message from “Templates”. While writing a message, select “Options” to access all the messaging options. You can save your messages that you send often to “Drafts”. 5.3.1.2 Write Pull-mail Access this item to edit an email.
Sent Messages being sent successfully are stored in this menu. Template Ten text templates are stored in this menu. They can be used for creating a new message. You can add text template or picture template to this item as per your willing. Pull-mail To use this function, users need to set account details and mail details of pull-mail through the path: Message>Settings>Pull-message setting>Options>New.
Add a new contact 5.4.1.1 Add a new contact from contacts index page 1) Select CONTACTS on main menu to enter contacts index page. 2) Focus on Add new contact and select ADD NEW to enter an edit interface. 3) Edit Name/memory location (phone memory, S-SIM or M-SIM memory) /ringtone/Email/Message alert and so on. 5) After finishing, select SAVE to save the record. 5.4.1.2 Add a new contact from desktop Enter a phone number on desktop using the physical keyboard.
Modify contact 1) 2) 3) 4) 5) 6) Select CONTACTS on main menu to enter contacts index page. Focus on the contact you want to modify. Select OPTION enter sub-menu. Select Manage contact. Select Edit to modify its information. Select SAVE to save you modification after that. Search contact You can search certain contact alphabetically or by its number. Select CONTACTS on main menu to enter contacts index page.
Export contacts You can export contact information to another one. 1) Select CONTACTS on main menu to enter contacts index page. 2) Focus on the contact you want to export. 3) Select OPTION enter sub-menu. 4) Select Send contact via 5) Press OK key to extend sub-menu, where you have three choices to send the contact: Message—transfer this contact information via message, the contact name and number will be sent as the message content. Bluetooth—transfer this contact information via Bluetooth. 5.
5.5.1.1 Edit Ringtones & Alerts: Set the incoming call tone, power-on prompt tone, power-off prompt tone, message tone, alarm sound, calendar sound, etc. Ring volume: Set the ring volume level. Ringing style: ON, Off and Ascend are available. Vibrate alert: Select ON or OFF as needed. Key sounds: Set key sound, key volume, warning sound and warning volume. 5.5.1.2 View View the details of a designated mode. 5.5.1.3 Reset Restore factory settings. Bluetooth 5.5.1.
Switch on/off—Turn off Bluetooth when you don’t want to connect other devices to your phone; turn on Bluetooth to allow other devices to connect to your phone. Device list—add trusted devices that you can connect to your phone without entering the pass key again. Search for new devices—Search for new devices nearby to add to your device list. Visibility—Allow your devices to be found by other devices, if your device is hidden (not visible), it can only be connected to by a previously paired device.
2), Select SETTINGS to enter its sub-menu (SETTINGS page). 3), Select Network settings to continue 4), Select Network mode to enter sub-menu 5), Select the network as per your willing, if “auto mode” selected, the device can automatically switch to GSM or 3G mode according to the network availability, parameters and the roaming agreements between network service providers. For further information, please contact your network service provider.
Note: This calculator provides limited precision and is only applicable to simple arithmetic calculation. Notepad The phone provides a notepad for users to keep trace of important events. World time Access this menu to view time of main cities in various time zones. Stopwatch Stopwatch is simple application for measuring time with possibility to register several results and suspend/resume measurement. Alarm Three alarm clocks are set but deactivated by default.
USB mass storage To use this function: 1) Select Main menu> Tools>Mass storage. 2) Activate the mass storage device. 3) Connect your phone to your computer with the USB cable of the phone and you will find the CD-ROM device that label with "PhoneUSBDriver" in your computer. 4) Copy the modem driver from your phone to your computer disk.
Capture video 1), Select CAMERA on main menu to active it to capturing mode. 2), In capturing mode, select OPTIONS to show tool bar. 3), Focus “Capture mode”, select OK, and then the sub-menu will show you four modes. 4), Select video and confirm, then select OK to start capture, Pressing STOP to stop the recording, and the video clip will be saved to Main menu/MY STUFF/Movies. Save images After capturing a picture, it will be stored in image viewer automatically. You have two choices to view this picture.
*4 Night mode: Turn on/off night mode as required. *5 Auto timer: choose On or Off. When choose on, camera will capture picture without press the snapshot key (OK button) when the time you set is exhausted. *6 Hide icons, you can choose On or Off. *7 Effect: Normal, Black & White, Negative and Sepia are available. *8 Quality: High, medium and low are available. *9 Save to: you can choose Phone or Memory card as needed. *10 Image viewer: Access this item to view pictures. 5.
Voice recorder Use this function to record audio files. The record files will be stored in memory card. After finishing recording: 1> You can select ’send’ to send the audio file via picture message or Bluetooth. 2> Or you can select ‘options’ to perform further options: play, delete, rename the file or choose audio viewer to visit Music directory. You can find the audio file through the path: My stuff > Music>Tracks. Player Select PLAYER on main menu to enter media player.
5.9 Social Network Twitter Log on Twitter through a web page. Facebook Log on Facebook through a web page. Facebook SMS Log on Facebook SMS through a web page. 5.10 Aplicaciones It’s a folder where downloaded games and applications are stored. You can install or delete new applications are per your requirement. 5.11 My stuff You can select MY STUFF to enter Music/Movies/Pictures/memory card directory, all audio files, pictures and video clips can be found there easily. 5.
specially designed for mobile devices which are created by extensible hypertext markup language (XHTML). 1) Select Internet on main menu to enter browser menu page. 2) Input the correct website address in address column or choose an address from the bookmark/history/saved pages and press OPEN to enter the page you want. 3) If you want to go to home page, just focus on “home page” then choose OPEN. 4) To move around the page, press “UP” “DOWN” ”LEFT” “RINGHT” direction key to navigate.
5.13 Top Juegos Log on Top Juegos through this access. 6 Appendix Appendix 1：Troubleshooting If you find exceptions when operating the mobile phone, restore the factory settings and then refer to the following table to solve the problem. If the problem persists, contact the distributor or service provider. Fault S-SIM or M-SIM card error Cause The S-SIM or M-SIM card is damaged. The USIM card is not in position. The metal face of the S-SIM or M-SIM card is polluted.
Poor received signal quality Signals are obstructed. For instance, radio waves cannot be effectively transmitted nearby a high building or in a basement.
The mobile phone cannot be powered on The battery energy is exhausted.
The battery cannot be charged The mobile phone is not in a service area of the WCDMA or GSM network The signal is weak The charging voltage does not match the voltage range indicated on the charger An improper charger is used Poor contact Move to the network operator's service area Move to a place where the signal quality is high Ensure the charging voltage matches the voltage range indicated on the charger Use the charger specially designed for the mobile phone Ensure the charger plug is in good conta
FCC Caution Any Changes or modifications not expressly approved by the party responsible for Compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
—Consult the dealer or an experienced radio/TV technician for help. \ SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output.
