User's Manual

Table Of Contents
Preparation before use
Installing the SIM card
Your phone will not work without the SIM
card. The Subscriber Identity Module (SIM)
card identifies you to the wireless network.
1 Remove the back cover by pulling the
tab upward.
2 Insert the SIM card into the slot, with
copper contacts facing down the pins
as shown.
Installing the Memory card
Your phone has a slot for a micro SD flash memory card.
Insert or remove the SD card:
To insert an SD card, push the card
into the slot, copper contacts facing
down. Push the card gently in until
it locks into place.
To remove an already-installed SD
card, pull out the card gently with
y our fingertip.
Installing the battery
1 Insert the battery and make sure that the terminals on the
battery aligns with the metal contacts on the phone.
2 Replace the back cover and push until the locking tabs clicks
into place.
User Manual QS-150
6