User's Manual

Table Of Contents
End key to go to the standby mode.
Settings
You can set the general functionality of your phone. Press Menu
and then select Settings.
Phone settings
Press Menu>Setting and then select Phone settings to set the
following;
Display settings
Backlight Sets the back light behavior; Always on,
15 seconds on, or 30 seconds on.
Wallpaper Sets the wallpaper screen display;
Wallpaper 1 or 2
Greeting note Select Enable if you want to add a
greeting message display during start up.
Language Sets the operating language. The language
list available on your phone depends on
the model version.
Date time Select Enable if you want to show the
display date and time in the standby mode.
Security settings
Power on PIN1 Set to On to enable the PIN1 code entry of
your SIM before the phone proceeds to
turn on. You can also select Change PIN1
to change the PIN1 code.
Change PIN2 Changes the PIN2 code. This function is
network dependent. Please call your SIM
network to get more details.
Phone code Select On, Off, or Change phone code.
The default phone code setting is 0000.
User Manual QS-150
22