User's Manual

-7-
5.3 Settings
Profiles
The mobile phone provides multiple user profiles, so that you can customize some settings to adapt to the specific events and environments.
Customize the user profiles according to your preference and then activate the user profiles. The user profiles fall into four scenarios: Normal, Silent,
Meeting,Indoor and Outdoor.When you insert an earpiece to the mobile phone, the mobile phone automatically enters the Headset mode.
Display
Users can access this item to set wallpaper, screen saver, contrast, power on/off display, keypad backlight time, auto keypad lock etc.
Date & time
Set the date format, the time format, and detail time of the location.
Note: If you remove the battery from the mobile phone or if the battery energy was exhausted a long time ago, you may need to reset the date and time when
re-inserting the battery or powering on the mobile phone after recharging.
Phone setting
Users can access this item to set language, shortcut, Auto power on/off schedule, power manager,browser selection etc.
Call settings
Dual-SIM:Dual-SIM refers to two SIM card slots, and the two cards can standby at the same time or set one of them to display on the idle screen.
Caller ID: You can set caller ID as set by network , hide ID or send ID .
Call waiting: After you choose Activate, the mobile phone will contact the network. A moment later, the network will make a response and send a message to
acknowledge your operation. If the call waiting function is activated, the network will alert you and the mobile phone screen will display the incoming call
number if others are calling you while you are already in a conversation.
Call divert: this network function enables you to forward incoming calls to another number you have previously specified.
Call barring: The call barring function enables you to bar calls as needed. When setting this function, you need to use a network barring code, which can be
obtained from the network operator. If the code is wrong, an error message will be prompted on the screen. After selecting a call barring option, continue to
select Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then contact the network. A moment later, the network will
make a response and send the operation results to the mobile phone.
Auto redial: Set it to On or Off to enable or disable auto redial. If you set Auto redial to On, the mobile phone will automatically redial the number a
moment later if the called party does not reply. The number of auto redial times can be set to a maximum of 10. In the auto redial period, you cannot dial other
numbers. To end the auto redial process, press the End key.