User's Manual

The detector lets you mark known false alert areas so that you will not receive audio alerts in the
future at the marked location. The detector stores the GPS coordinates as well as radar band,
radar frequency and signal strength and compares it each time with the actual signal received. If
the received signal at the lockout location is different from the saved signal in terms of frequency
and/or signal strength the detector automatically unmutes and you will be alerted by audio again.
The display will show the band and signal strength and a small “L” icon in front of the radar band
letter indicates that the area is locked out. You can then either ignore the alert or delete the
previously saved locked out and re-save the new one.
To set a GPS lockout press the middle button during an alert for 2 seconds. The detector will state
“Lockout started” and will complete the process by stating “False alert area added”. To manually
unlock the detector press the middle button for 2 seconds in a locked out area. You can also
delete all lockouts in the menu.