User's Manual

The AutoCity driving mode allows the setting of minimum alert detection speed for signal
suppression and signal filtering resulting in significantly reduced false alerts. Select AutoCity in
Setting Mode.
Setting AutoCity speed: (feature selectable only if Setting Mode is set
to AutoCity): Tapping the Middle button lets you select the speed for editing
Left speed setting indicates the speed below which the radar reception of the detector will be
complete ly disabled (in example above 20 mph). No signals from
police radar or false signals from automatic door openers will be reported.
The right speed setting indicates the speed below which the detector will detect alerts in City
mode with reduced radar sensitivity (in example above 40 mph).
+ / - buttons on the right side of the detector will change the specific speed setting.
RECOMMENDATION “20” and “35”: The detector will not alert to any signal below 20 mph and
will operate with reduced radar reception between 20 and 35 mph. Maximum detector
sensitivity will be achieved above 35 mph.
Setting City and AutoCity sensitivity (this option is available only in City or AutoCity Mode): By
means of the Middle button you can select the radar band for editing.
To change the sensitivity of signal reception use + / - button on the
side of the unit. The level of signal suppression can be selected in the range 0-9. The displayed
numbers indicate the sensitivity reduction in the different radar bands. The example displayed
above indicates that the X Band sensitivity is reduced by 50%, K Band sensitivity reduced by 20%
and Ka Band sensitivity is not reduced at all (0% reduction).