Installation Manual

Radar Detector Radenso RC-M
Language: English / Deutsch / Czech
Factory reset: For reset press third button.
Delete all user points: For deleting all user points press third button.
S/N: XXXXX - Displays you Serial Number, that might be needed for you Radenso RC-M Update
SpeedMeter Option:
This function is intended for the legalization of the detector when used in countries where radar detectors are illegal. The detector
stops alerting you on GPS points, radars, and lasers and there is only current speed shown at the display. To activate this
function you need to hold the Second and third button for approximately 5 seconds. After that, you will enter into SpeedMeter. In
SpeedMeter mode GPS points, radars and laser functions are disabled. To reactivate your detection capabilities you need to run
a complete FW update.