Installation Manual

Radar Detector Radenso RC-M
2) Second button BRIGHTNESS / ALERT SUPPRESSION
Short press: You can change the brightness of the display - Bright -> Dim -> Smart Dark -> Full Dark. Long Press: If you hold it
during an alert you will mark the place of false radar reporting so at a given point detector during the next passage will be
suppressed. If you suppress a false alert, the detector will not detect radars. Hold button during the "suppressed" radar alert and
this listing will be canceled. After next passage radar alert will be signaled acoustically.
3) Third button SENSITIVITY / ADD YOUR OWN GPS POINT
Short press: You can scroll between Highway / City / Auto City modes. In City or Auto City modes the sensitivity of X / K / Ka
bands can be reduced according to user preference. Long Press: Add your own GPS point.
4) Buttons ⋀⋁
Short press: Changing volume of the detector.
Menu:
Press first button for entering into the menu.
Press the second button to go from one category to the next.
Press VOLUME ⋀ or ⋁ (on the right side of the detector) to change your setting within a category. To complete this change,
simply wait a few seconds without pressing a button. The unit will display “Setting Completed” to confirm your selection.
Alternatively, you can get out of the menu by pressing the third button. After five seconds of inactivity, the menu will automatically
save and quit. Alternatively, you can quit the settings menu by pressing the mid button.