USER + INSTALLATION MANUAL Radar Detector Radenso RC-M
Congratulations on your purchase of world's most intelligent radar and laser detector Radenso RC-M. Main functions of Radenso RC-M Radenso RC-M is the most advanced detector from Radenso family and is designed to protect the driver from speeding fines.
2) Second button BRIGHTNESS / ALERT SUPPRESSION Short press: You can change the brightness of the display - Bright -> Dim -> Smart Dark -> Full Dark. Long Press: If you hold it during an alert you will mark the place of false radar reporting so at a given point detector during the next passage will be suppressed. If you suppress a false alert, the detector will not detect radars. Hold button during the "suppressed" radar alert and this listing will be canceled.
Items in the menu are as follows: (recommended settings are highlighted) Front Radar: On / Off - Switches on Front Radar functionality. In case this option is turned off, further menu items controlling the Front Radar are not displayed. Rear Radar: On / Off - Switches on Rear Radar functionality. In case this option is turned off, further menu items controlling the Rear Radar are not displayed.
F - K-Band: Wide / Narrow / Instant Only / Off (In countries, where police use K band radars, it is recommended to use K Narrow setting) F - K Filter: Off / Low / High - Filtering false alerts from blind spots and ACC. (When K Filter is activated, pulsed radars such as Iskra are not detected) F - Ka-Band: Wide / Narrow / Off F - Ka 34.0 On / Off (if you are sure that police in your region does not use this band, then Off) F - Ka 34.
R - X-Band: On / Off R - K-Band: Wide / Narrow / Instant Only / Off (In countries, where police use K band radars, it is recommended to use K Narrow setting) R - K Filter: Off / Low / High - Filtering false alerts from blind spots and ACC. (When K Filter is activated, pulsed radars such as Iskra are not detected) R - Ka-Band: Wide / Narrow / Off R - Ka 34.0 On / Off (if you are sure that police in your region does not use this band, then Off) R - Ka 34.
R - MR Filter: Low / High / Off - Filtering false alerts from blind spots and ACC. (When MR Filter is activated, detection distance on MR band radars is slightly reduced. We recommend using „Normal“ which is very good in sensitivity/false alerts immunity ratio.) Jammer: ALP / FF / Off - Turns on accessories. Please note, that it is important that you would select the correct type of accessories you have installed in your car, for the PRO will not work as intended if your settings are incorrect.
Language: English / Deutsch / Czech Factory reset: For reset press third button. Delete all user points: For deleting all user points press third button. S/N: XXXXX - Displays you Serial Number, that might be needed for you Radenso RC-M Update SpeedMeter Option: This function is intended for the legalization of the detector when used in countries where radar detectors are illegal. The detector stops alerting you on GPS points, radars, and lasers and there is only current speed shown at the display.
Operating frequency: GPS: SiRF STAR IV Ka narrow: 34.0GHz, 34.GHz, 34.7GHz, 35.5GHz (±120MHz) Ka wide: 33.4 GHz ~ 36.0 GHz K narrow: 24.125GHz (±70MHz) K wide: 24.125GHz (±150MHz) MultaRadar CD/CT, Gatso RT3 Laser: 904nm Technical parameters: Operating temperature: -20 +85 °C Storage temperature: -20 +85 °C Operating voltage: 11 – 16 V Power consumption: 250mA normal, 330mA max Dimenisons: 62 x 92 x 34 mm Database Updates: Database update is recommended to check once in three months.
Installation manual Radenso RC-M Radar Detector Radenso RC-M
A) Radenso RC-M CONTROL UNIT The control Unit is usually placed in a fuse box, space above pedals, using stripping tape to wires in your car, or using double-sided duck tape. Connecting individual components is obvious thanks to writing on the control box. All can be easily done thanks to plug-in connectors.
D) SPEAKER Signaling speaker should be placed somewhere in the leg-space of the driver, or passenger. Youneed to pace it so that when the speaker goes off you can clearly hear the alerts E) RADAR ANTENNA HD+ / HDM+ The antenna captures signals emitted by radars; the choice of the installation place is, therefore, crucial to its proper functioning and good sensitivity of the detector.
F) LASER SYSTEM CONTROL UNIT Control unit is installed in the interior of the vehicle, either under the dashboard or under the padding, however you see fit. The only important thing is that the control unit must not get into contact with water. Connect the control unit power cord to the control unit using the dedicated pins. NOTE: 1A fuse is placed inside the control box. If you require extra fuse it can be installed on the cables (not necessary).
G) LASER SENSORS Laser sensors can be mounted on the front of the vehicle in the front grill, above the bumper or in the rear of the vehicle. Be extra careful to not damage the cable, sensor or connector during installation, as it will terminate your warranty. To ensure better looks of your vehicle we recommend to use plexiglass „Perspex” to hide the sensors. For more information about the glass please contact your distributor. To drive the cables to the fuse box, please use the original cable pass.
To ensure proper functionality of all assets of the Radenso RC-M detector, we recommend having the device installed in authorized garage. To arrange installation, please contact your dealer.
FCC Notes This device complies with part 15 of FCC rules: Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation. NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
