SDS

B’laster PB Penetrating Lithium Grease
Page: 4/7
Recommended monitoring method
NIOSH 1550 (Naphthas); NIOSH 5026 (Oil mist; mineral); NIOSH 1500
(hydrocarbons, B.P. 36 - 216 ºC)
Exposure controls
Appropriate engineering controls
Ensure adequate ventilation.
Personal protection equipment
Eye/face protection
Wear protective eyewear (goggles, face shield, or safety glasses).
Skin protection (Hand protection/ Other)
Wear suitable gloves if prolonged skin contact is likely (Nitrile rubber or
Butyl rubber). Check with protective equipment manufacturer's data.
Respiratory protection
Normally no personal respiratory protection is necessary. In case of
insufficient ventilation, wear suitable respiratory equipment. Check with
protective equipment manufacturer's data.
Thermal hazards
Not normally required. Use gloves with insulation for thermal protection,
when needed.
Environmental Exposure Controls
Avoid release to the environment.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Appearance
Aerosol spray
Color.
Clear
Odor
Mild petroleum, Solvent-like.
Odor Threshold (ppm)
Not available
pH (Value)
Not available
Melting Point (°C) / Freezing Point (°C)
Not available.
Boiling point/boiling range (°C):
Not available.
Flash Point (°C)
-104 (Propane)
Evaporation Rate
Not available.
Flammability (solid, gas)
Extremely flammable
Explosive Limit Ranges
2.1% - 9.5% v/v (Propane)
Vapor pressure (Pascal)
ca. 95 x 10
4
(Propane)
Vapor Density (Air=1)
ca. 1.56 @ 0ºC (Propane)
Density (g/ml)
Not available
Solubility (Water)
Not available
Solubility (Other)
Not available
Partition Coefficient (n-Octanol/water)
Not available
Auto Ignition Point (°C)
450 (Propane)
Decomposition Temperature (°C)
Not available
Kinematic Viscosity (cSt)
< 20.5 @ 40 °C
Explosive properties
Not explosive.
Oxidizing properties
Not oxidizing.
Other information
None
SECTION 10: STABILITY AND REACTIVITY
Reactivity
Stable under normal conditions.
Chemical stability
Stable.