SDS

Multi-Max Premium Synthetic Multi-Use Lubricant
Page: 3/6
January 16, 2019
SECTION 7: HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes.
Conditions for safe storage, including any incompatibilities
-Storage temperature
Protect from sunlight and do not expose to temperatures exceeding 50 ºC/122 ºF.
-Incompatible materials
This product should be stored away from sources of strong heat or oxidizing chemicals.
Specific end use(s)
Lubricant
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational Exposure Limits
SUBSTANCE.
CAS No.
(8hr TWA)
(STEL)
Note:
PEL
(OSHA)
TLV
(ACGIH)
PEL
(OSHA)
TLV
(ACGIH)
Mineral oils / Oil Mist
-------
5 mg/m3 5 mg/m3
(I)
----- -----
(I)
Carbon Dioxide
124-38-9
5,000 ppm
5,000 ppm
-----
30,000 ppm
#
#
Assure minimum oxygen content of work atmosphere. ; (I) Inhalable fraction
Recommended monitoring method
Not normally required.
Exposure controls
Appropriate engineering controls
Provide adequate ventilation to ensure that the occupational exposure
limit is not exceeded.
Personal protection equipment
Eye/face protection
Wear protective eyewear (goggles, face shield, or safety glasses).
Skin protection (Hand protection/ Other)
Wear suitable gloves if prolonged skin contact is likely.
Respiratory protection
In case of insufficient ventilation, wear suitable respiratory equipment.
Thermal hazards
Not normally required. Use gloves with insulation for thermal
protection, when needed.
Environmental Exposure Controls
Prevent release to the environment.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Appearance
Aerosol
Color.
Amber
Odor
Typical Petroleum
Odor Threshold (ppm)
Not available
pH (Value)
Not available
Melting Point (°C) / Freezing Point (°C)
Not available
Boiling point/boiling range (°C):
Not available