SDS
Multi-Max Premium Synthetic Multi-Use Lubricant
Page: 2/6
January 16, 2019
Naphthalenesulfonic acid, dinonyl-, calcium salt (2:1) 0.75-3 57855-77-3
Skin Irrit. 2; H315
Eye Irrit. 2; H319
Carbon dioxide 2-5 124-38-9
Press. Gas (*)
Additional Information - Substances in the product which may present a health or environmental hazard, or which have been assigned
occupational exposure limits, are detailed below.: None
* The exact percentage withheld as a trade secret in accordance with 29 CFR 1910.1200.
** Dearomatized. Contains <2% aromatic hydrocarbons.
SECTION 4: FIRST AID MEASURES
Description of first aid measures
Inhalation
Not normally required. If symptoms occur obtain medical attention.
Skin Contact
Not normally required. If skin irritation occurs: Get medical
advice/attention.
Eye Contact
Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing. If symptoms occur
obtain medical attention.
Ingestion
Do not give anything by mouth to an unconscious person. Seek medical
treatment. Do NOT induce vomiting.
Most important symptoms and effects, both acute and
delayed
May be fatal if swallowed and enters airways.
Indication of any immediate medical attention and
special treatment needed
IF SWALLOWED: Immediately call a POISON CENTER or
doctor/physician. Do NOT induce vomiting.
SECTION 5: FIRE-FIGHTING MEASURES
Extinguishing Media
-Suitable Extinguishing Media
Extinguish with carbon dioxide, dry chemical, foam or water spray.
-Unsuitable Extinguishing Media
Do not use water jet.
Special hazards arising from the substance or
mixture
Contains gas under pressure; may explode if heated.
Advice for fire-fighters
A self contained breathing apparatus and suitable protective clothing
should be worn in fire conditions. Keep containers cool by spraying
with water if exposed to fire.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and
emergency procedures
Avoid contact with eyes.
Environmental precautions
Prevent liquid entering sewers, basements and work pits.
Methods and material for containment and cleaning up
Cover spills with inert absorbent material. Transfer to a container for
disposal or recovery.
Reference to other sections
None
Additional Information
None