Instruction manual

97
Warnings and notes to ensure safe operation
Warning: Do not disconnect equipment unless power has
been switched off.
Warning: Clean only with antistatic moistened cloth.
Warning: Substitution of components may impair suitability
for hazardous locations.
• The equipment shall be installed and protected from mechanical
impact and ultraviolet (UV) sources.
• Clean only with a moistened antistatic cloth as potential
electrostatic hazard may exist. Service equipment only with
conductive clothing, footwear and personal grounding devices
to prevent electrostatic accumulation.
• Internal grounding provisions shall be provided for field wiring.
Bonding between conduit shall be provided during installation,
and all exposed non-current carrying metallic parts shall be
bonded and grounded.
• Installation in a Class I, Division 2 or Class I, Zone 2 hazardous
location shall be in accordance with the Canadian Electrical
Code (CEC Part 1) Section 18 Division 2 wiring methods.
OBSERVE THE SPECIFICATIONS OF THE CONTROL
DRAWING!
70098_E_CI7100_2XH.QXD 27.07.2005 9:28 Uhr Seite 97